Flexible Thinking Flexible Circuit Technology—Looking Back and Forward
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Chapter 2
November 14, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
The Printed Circuit Designer’s Guide to... DFM Essentials
by Anaya Vardya, American Standard Circuits / ASC Sunstone Circuits
Chapter 2: Panelization
Panelization is the process of placing one or more PCBs on a manufacturing panel and incorporating features to assist manufacturing (such as tooling holes, fiducials, coupons, panel thieving, etc.). Panelization is one of the highest impact factors in the cost of a PCB.
The panel area available for circuit boards plus coupons is known as the usable area (Figure 2.1). Test coupons are added by the fabricator to the perimeter of the manufacturing panel outside the usable area. The number and type of coupons are based on the specs that the PCBs are being built to and requirements for controlled impedance. Coupons may sometimes further reduce the amount of a PCB panel that is available for the circuit boards. This is defined by the fabricator as required perimeter for coupons. This is typically about 1 inch or 25.4 mm and is a fixed area based on panel size. Panel utilization is measured as a percentage, defined by the total area for PCBs divided by the total panel area.
Cost-effective material utilization is defined by a target panel with greater than 75% panel utilization. Raw laminate is one of the primary cost constituents of a multilayer PCB. Optimizing panel structures around standard base materials while achieving maximum material utilization on one of the standard panel sizes can have a significant impact on multilayer board prices and deliveries. The three most preferred sizes in North America are 12x18 inches, 18x24 inches and 21x24 inches, with 18x24 inches being the most common. For special applications, other panel sizes can be provided. In Asia, typically the shops will process custom panel sizes in order to maximize utilization. The most effective cost per unit area processed is usually found with a larger panel size.
Visit the I-Connect007 library to continue reading The Printed Circuit Designer’s Guide to DFM Essentials.
Share on:
Suggested Items
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
03/06/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed several commonly used surface finishes, laying out the unique properties, the application process, and the associated pros and cons. Our final steps in the manufacturing process include routing, final inspection, and shipment.
KYZEN’s Jason Shwartz to Take Part in Panel Discussions of EV Electronics Reliability at IPC APEX 2025
03/04/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit in Booth 642 at the upcoming 2025 IPC APEX EXPO, scheduled for March 18-20, 2025, at the Anaheim Convention Center.
Global Smartphone Panel Shipments to Grow 11.4% in 2024, with Chinese Manufacturers’ Market Share Approaching 70%
02/26/2025 | TrendForceTrendForce’s latest findings reveal that global smartphone panel shipments reached 2.157 billion units in 2024, marking an 11.4% YoY increase—the highest in recent years.
Gaming Monitor Panel Growth to Slow in 2025—LCD Up 5%, OLED Up 40%
02/19/2025 | TrendForceTrendForce’s latest investigations reveal that global LCD gaming monitor panel shipments (>144 Hz) reached 32.42 million units in 2024, marking a 12% YoY increase. However, due to a lack of major demand catalysts and struggling profitability in mainstream gaming monitors, 2025 shipments are expected to grow at a slower rate of 5%, reaching approximately 34 million units.
Transparent Electronics Market to Reach $2611 Million by 2030
01/31/2025 | BUSINESS WIREThe Global Transparent Electronics Market was valued at $963 Million in 2023 and is anticipated to reach $2611 Million by 2030, witnessing a CAGR of 15.4% during the forecast period 2024-2030.