ASMPT Simplifies High-Mix SMT Production with Automated Program Changeovers
January 30, 2025 | ASMPTEstimated reading time: 2 minutes
ASMPT, the global market and technology leader in hardware and software solutions for semiconductor and electronics manufacturing, has implemented another step in automating product changeovers on the SMT line. The Automated Program Change function in the WORKS Operations application, which is part of the WORKS Software Suite, has been enhanced with a crucial new feature: In addition to triggering automatic program changeovers with family setups, its latest version now also supports them across setups.
“Automatic Program Change has proven to be a real game changer. Customers report setup time reductions of up to 35 percent and significantly lower nonconformity costs,” says Thomas Marktscheffel, Director Product Management Software Solutions at ASMPT SMT Solutions. In the past, every product change required new assembly programs to be manually downloaded to each machine in a time-consuming and error-prone process. With Automatic Program Change, this now happens automatically as soon as the first PCB of a new batch enters the line. And in the latest version, even setup changeovers are seamlessly integrated because the machines let operators know when stencils or feeder tables need to be replaced. This intelligent function optimizes product changeovers even in complex high-mix/low-volume and provides the foundation for further automation steps like automatic feeder table changeovers.
Industry-standard data transfers
Automated Program Change and its latest enhancement are based on a network with IPC-HERMES-9852 interfaces, which enables seamless data transfers in accordance with the latest industry standard. To make the concept work, the system transmits the necessary information for each new circuit board to the first machine on the line – usually the solder paste printer – either via a barcode reader or digitally via IPC-HERMES-9852 data. If the machine recognizes a batch change, it automatically loads the new assembly program. When the board moves to the next machine, it is accompanied by its IPC-HERMES-9852 data. In this way, each station along the line, irrespective of its manufacturer, adapts its program automatically when needed. The open and standardized interface also ensures that the conveyors automatically adapt to the respective circuit board width – again irrespective of their manufacturer. With family setups, this means that product changeovers are possible with no operator assists whatsoever.
Quick and error-free product changeovers
For electronics manufacturers, the optional Automated Program Change function in WORKS Operations offers several advantages: It enables rapid product changeovers without the line being idle – all that’s required is a barcode reader at the beginning of the line. The automatic changeovers also relieve the operators and avoid scrap resulting from faulty manual downloads.
“With the Automated Program Change across setups, we continue to advance our Intelligent Factory concept at ASMPT,” says Thomas Marktscheffel. “Our goal is to make electronics manufacturing more productive, resilient and efficient through the integrative use of data on the basis of standardized interfaces.”
Suggested Items
IPC Asia’s Talent Development Program Opens Pathways to a More Qualified Workforce
03/14/2025 | Evelyn Cui, IPC AsiaIn Asia, the contradiction between the rapid development of the electronics manufacturing industry and the shortage of talent is particularly evident. The existing talent pool cannot fully meet the market's demand for highly skilled professionals. According to feedback from industry companies, there is an urgent need for professionals with knowledge of IPC standards and practical skills in electronics. However, the reality is that most academic courses are disconnected from the actual needs of the industry, leading to disappointing results when companies recruit from universities and schools.
Imagine the Possibilities: Tech Conference 2025
03/05/2025 | Marcy LaRont, I-Connect007As we approach the 25th anniversary of IPC APEX EXPO, excitement buzzes around the annual Technical Program. Coming off a tremendously successful program in 2024—co-hosted with ECWC16 and with a significant global presence—organizers wanted to match that same level of engagement. In this interview, Stan Rak of SF Rak Company and Udo Welzel of Robert Bosch Mobility Electronics, co-chairs of the Technical Program Committee (TPC), highlight efforts of the volunteer committee to bring another quality technical program to life.
One Designer’s Journey With IPC Apprenticeships
03/03/2025 | Cory Blaylock, IPCIf you’d told Steve Chirpich a year ago that he would be designing printed circuit boards, he might have been surprised. After deciding to make a career change to follow his passion for technology and PCB layout design, Steve took a leap into the high-tech world of electronics manufacturing.
Dell Technologies Accelerates Telecom Transformation with Comprehensive Program, Expanded Partnerships
02/27/2025 | BUSINESS WIREDell Technologies announces the Open Telecom Transformation Program and new AI solutions to simplify and accelerate network cloud transformation for communications service providers (CSPs).
Elementary, Mr. Watson From Classroom to Career—Bridging the Gap in PCB Design Talent
02/27/2025 | John Watson -- Column: Elementary, Mr. WatsonHas anyone else felt we're doing more with less in our industry and we constantly need more and better talent? Although we are in the middle of what I consider the golden age of the PCB industry in terms of innovation, we still don’t have the necessary talent to fill positions. We need to take a serious look at our industry, figure out how we found ourselves in this position, and what we can do to turn the situation around.