Pieces of a Puzzle: PCB Designer John Watson Sees the Big Picture of Life and Work
February 13, 2025 | Michelle Te, IPC CommunityEstimated reading time: 1 minute
John Watson started his career in military intelligence and as an electronics repair technician but moved over to printed circuit board design at a time when the whole electronics industry was experiencing a paradigm shift.
“I wanted to be involved in electronics,” he says of those younger days. “As a technician, you used to go down to a component level on fixing things. But in the late 1990s, they began just swapping boards out. They didn't care if you went down to the component level. So, the whole area of electronics technician work changed. That's when I changed my career and went into PCB design.”
There’s a common belief, he says, “that you need a set path to get into PCB design or that maybe you have to be an engineer, but I’ve been doing this career for about 24 years now, and it’s really exciting.”
Since shifting to PCB design, John has supported the industry through his roles as a PCB designer, an instructor at Palomar College in southern California for the past three years, and as a member of a design leadership initiative through IPC.
John was introduced to IPC standards in 2000 as a student of PCB design by instructor Bill Brooks. “As we walked through the door of the classroom, he handed us IPC-2221 and 2222, and said, ‘These are your textbooks.’ That was my introduction to IPC,” John says. “I really held true to IPC as the standard of how it should be done.”
In the summer of 2023, John was invited to serve as a representative on the Design Leadership Council, led by Peter Tranitz, senior director of technology solutions, IPC Electronics Europe GmbH. “It’s a fantastic group, and I'm really glad to see this happening with IPC,” John says. “This is a very active and talented group of individuals and includes some of the greatest leaders in our industry. It’s very exciting to see.”
Continue reading this article in the Winter 2025 issue of IPC Community.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.
Electronics Industry Warns Mexico Tariffs Could Undercut U.S. Manufacturing and Supply Chain Resilience
10/24/2025 | Global Electronics AssociationAs negotiations over U.S.–Mexico trade policies near an October 29 deadline, the Global Electronics Association released a new policy brief, From Risk to Resilience: Why Mexico Matters to U.S. Manufacturing.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.
North American EMS Industry Shipments Down 1.4% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.26.