Global PCB Connections: Rigid-flex and Flexible PCBs—The Backbone of Modern Electronics
Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
The Death of the Microsection
June 26, 2025 | Bob Neves, Reliability Assessment Solutions, Inc.Estimated reading time: 1 minute
I got my start out of college grinding and polishing PCB microsections. My thumbs are a bit arthritic today because of the experience (microsection grinders know what I mean). Back then, via structures were rather large, and getting to the center in six steps of grinding and polishing was easy compared to what my team has been doing recently at the lab.
HDI, ultra HDI, substrates, embedded components, and the plethora of (tiny) via structures (micro, stacked, buried, staggered, etc.) that connect everything in today’s “boards” make arriving at a via structure’s center using a microsection a true nightmare—and a miracle for the lab technician if attained.
Our historical faith in the microsection stems from the belief that:
- Evaluating the visible attributes of the via structure will demonstrate the quality and reliability that the PCB represents
- Looking at the two sidewalls at the center of a 360-degree via structure will demonstrate the quality and reliability of the entire structure
- Looking at a few via structures from the many thousands on a panel will demonstrate the quality and reliability of all the structures on a panel
You can likely discern that more “faith and belief” are involved in interpreting the results from the microsectioning process than in statistical significance.
In addition to looking at the visual attributes (“prettiness”) of sections from a few via structures, some are also floated on a solder pot before microsectioning. We are meant to believe those few floated via structures will demonstrate the PCB’s ability to survive the component attachment process. While a single wave solder process may have been the norm many years ago, we now primarily attach components with convection reflow. Today’s component attachment process may also include replacement of components, attachment of connectors, and hand soldering of various parts and wires, which ultimately exposes the PCB to several soldering temperature cycles before truly beginning its life in the field. This is something that is not being captured in today’s solder float and microsection process.
To continue reading this article, which originally appeared in the June 2025 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
New Episode Drop: MKS’ ESI’s Role in Optimize the Interconnect
08/21/2025 | I-Connect007In this latest episode, Casey Kruger, director of product marketing at MKS’ ESI, joins On the Line With… host Nolan Johnson to share how CO₂ laser technology delivers faster, more accurate vias in a smaller, more energy-efficient footprint.
Polar Instruments Announces Additive Transmission Line Support for Si9000e
08/20/2025 | Polar InstrumentsTransmission lines embedded into the PCB surface are a feature of UHDI constructions. The 2025 fall release of Polar's Si9000e PCB impedance & insertion loss transmission line field solver incorporates eight new single ended, differential and coplanar transmission line structures.
Global PCB Connections: Understanding the General Fabrication Process—A Designer’s Hidden Advantage
08/14/2025 | Markus Voeltz -- Column: Global PCB ConnectionsDesigners don’t need to become fabricators, but understanding the basics of PCB fabrication can save you time, money, and frustration. The more you understand what’s happening on the shop floor, the better you’ll be able to prevent downstream issues. As you move into more advanced designs like HDI, flex circuits, stacked vias, and embedded components, this foundational knowledge becomes even more critical. Remember: the fabricator is your partner.
Joby to Acquire Blade’s Passenger Business, Accelerating Air Taxi Commercialization
08/04/2025 | BUSINESS WIREJoby Aviation, Inc., a company developing electric air taxis for commercial passenger service, announced it has entered into a definitive agreement with Blade Air Mobility, Inc. to purchase Blade’s leading urban air mobility passenger business. Blade's Medical division, which was not included in the transaction and will remain a separate public company, is to partner with Joby on medical transportation.
Connect the Dots: Sequential Lamination in HDI PCB Manufacturing
07/31/2025 | Matt Stevenson -- Column: Connect the DotsAs HDI technology becomes mainstream in high-speed and miniaturized electronics, understanding the PCB manufacturing process can help PCB design engineers create successful, cost-effective designs using advanced technologies. Designs that incorporate blind and buried vias, boards with space constraints, sensitive signal integrity requirements, or internal heat dissipation concerns are often candidates for HDI technology and usually require sequential lamination to satisfy the requirements.