Global PCB Connections: Rigid-flex and Flexible PCBs—The Backbone of Modern Electronics
Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Digital Twin Concept in Copper Electroplating Process Performance
July 11, 2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.Estimated reading time: 1 minute
Editor’s Note: This is an excerpt from a technical paper presented at the inaugural Pan European Design Conference in January 2025. It is reflected as originally presented with minor edits for grammar. There is a link to access the full paper at the conclusion of this excerpt.
Abstract
PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Copper electroplating is crucial in PCB manufacturing, primarily because it reduces ground line impedance and voltage drop. The performance of the electroplating process directly affects the quality of the copper layer and related mechanical properties. In acid copper plating, achieving proper thickness distribution and surface uniformity without compromising metallurgical properties like elongation and tensile strength is challenging. Lowering the current density can help equalize copper thickness but significantly increases plating time, adversely affecting PCB throughput.
Therefore, controlling process performance and the quality of the electroplated copper layer are vital aspects of PCB plating, which remains challenging even for experienced PCB manufacturers. Recognizing plating process performance in terms of copper layer coverage and thickness up front adds significant value to process design and control. This paper explores the concept of automated copper thieving and the digital twin of the copper plating process in PCB manufacturing. These modern CAE tools facilitate the rapid assessment and mitigation of copper under- and over-plated surface areas, aligning closely with the principles of smart manufacturing.
To read the entire paper, which appeared in the June 2025 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Electrodeposited Copper Foils Market to Grow by $11.7 Billion Over 2025-2032
09/18/2025 | Globe NewswireThe global electrodeposited copper foils market is poised for dynamic growth, driven by the rising adoption in advanced electronics and renewable energy storage solutions.
MacDermid Alpha Showcases Advanced Interconnect Solutions at PCIM Asia 2025
09/18/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha Electronic Solutions, a global leader in materials for power electronics and semiconductor assembly, will showcase its latest interconnect innovations in electronic interconnect materials at PCIM Asia 2025, held from September 24 to 26 at the Shanghai New International Expo Centre, Booth N5-E30
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.