Flexible Thinking: Designing Flex Circuits for Dynamic Reliability
Global PCB Connections: Rigid-flex and Flexible PCBs—The Backbone of Modern Electronics
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Understanding Tolerances in Flexible Circuit Design
April 1, 2026 | Chris Clark, Flexible Circuit TechnologiesEstimated reading time: 1 minute
The challenge with cumulative tolerances is meeting the dimensional requirements for items dimensioned on a drawing or specification for a flexible or rigid-flex circuit. It is critical to understand the fabrication processes and how features are defined when creating your tolerance requirements.
Common Features to Keep in Mind
Copper features
These are almost always photo-defined, either through an additive or subtractive (etching) process with subtractive being more common. Copper thickness is the primary factor impacting tolerancing on an etched feature. The thicker the copper, the more difficult it is to control the width or the size of the etched feature. For instance, you may be able to control the width of a conductor to ±12 μm on copper that is less than 18 μm (half-ounce) thick, while attempting this tolerance on one- or two-ounce copper would be much more challenging. Remember, when you have two or more layers, you must factor in plating, as it adds to the copper thickness. Button or pads-only plating can help reduce the impact of this. As copper gets thicker, the ability to control these dimensions diminishes. A realistic tolerance on 35 μm (1-ounce) copper is typically greater than ±25 μm. The tolerances go up from there as copper thickness increases.
Holes
Drilled holes: Mechanical drill bits are generally available in 25 μm or less increments through the range of common bit sizes of 100 μm to ~ 6.5 mm. Common tolerances for mechanical drill operations are ±25 μm for a non-plated hole and ±75 μm for a plated hole. Remember, any flexible circuit that is two or more layers will typically require plating.
To continue reading this article, which originally appeared in the March 2026 of I-Connect007 Magazine, click here.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Driving Innovation: Selecting the Right Laser Source
04/28/2026 | Simon Khesin -- Column: Driving InnovationWhen I first joined Schmoll Maschinen, I brought experience from almost every PCB process, except for laser. As I immersed myself in laser processing, I realized why it can seem so daunting to a newcomer. The complexity arises from three intersecting factors: A vast variety of laser sources: CO2, UV-nano, green-pico, UV-pico, IR-pico, and others; a diverse range of applications: Drilling, cutting, ablation, and more; and an extensive list of materials: These have vastly different absorption rates. Choosing the right machine or laser source is rarely trivial. Even for experienced engineers, answering "Which source is best?" requires examining the business's specific goals.
Institute of Circuit Technology Spring Seminar 2026: A Bright Future in Europe
04/23/2026 | Pete Starkey, I-Connect007Through the leafy lanes and spring flowers of Warwickshire and back to Meridan, the traditional centre of England, and now officially part of the Metropolitan Borough of Solihull in the county of the West Midlands, I attended the Annual General Meeting and Spring Seminar of the Institute of Circuit Technology (ICT) on April 14. Out of the AGM came notable changes in leadership at the top of the Institute: the retirement of Mat Beadel as chair and Emma Hudson as technical director. Effective May 1, Steve Driver is the new chair, and Alun Morgan is the new technical director.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
04/23/2026 | Team NCAB -- Column: Fresh PCB ConceptsWhen engineers hear the phrase “harsh environment,” they usually think of the extreme temperature swings, vibration and shock, pressure changes, or radiation in aerospace. However, aerospace is not the only harsh environment where electronic assemblies must survive. Automotive power electronics, downhole oil and gas tools, marine controls, rail systems, defense platforms, and industrial automation equipment all expose PCBs to environments that are equally unforgiving. The stress mechanisms may differ, but the physics does not.
Advanced Packaging for AI: Reliability Starts at the Cu/Cu/Cu Microvia Junction
04/20/2026 | Kuldip Johal, MKS' AtotechThe rapid growth of AI computing, from training clusters to inference at scale, is reshaping demand across the entire electronics supply chain. Advances in technology requirements, such as higher bandwidth, lower latency, and greater compute density, are driving the development of advanced packaging technologies and transforming the PCB industry across design, manufacturing, testing, and even architecture.