It’s Only Common Sense: Marketing Isn’t Fluff, It’s Ammunition
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
Bernie Kessler: Pioneering Spirit Then and Now
April 7, 2015 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes
Goldman: It was called IPC Expo then, because it was just the PCB manufacturing side of things, no assembly. I was at that first meeting in Chicago, too. We were very worried as to whether or not it was a good idea.
Kessler: Yes, I was worried. However, this is a great opportunity to tell my story. If you remember, I voted against the motion to have this Expo every other year. I spoke to the issue of having it every year, and then I offered an amendment that we have it every year, and that amendment was defeated. It was the single time within IPC that we really had a different perspective between the major suppliers and the small suppliers, like me.
I was fairly well integrated into the NEPCON show, at a very good priority position. These guys, the major suppliers, wanted to go to Munich for productronica every other year and then have this show every other year. But a small supplier like me could not go to Munich. That meant if we jumped out of NEPCON into an every two year enterprise, we lost our position at NEPCON.
Goldman: And position was everything at NEPCON.
Kessler: Position was everything at the time, and so I voted in favor of the annual. Well, I lost. But we were so successful with that first Expo that they then decided to do it on an annual basis.
Goldman: So you won in the end?
Kessler: I lost all the battles, but I won the war. Now I look at this and I am absolutely amazed. And I think I miss the pioneer spirit, which seems to be gone, because we've already reached a whole series of plateaus. We were concerned about the first plateau and now we're well past that.
Goldman: And it's a regular phenomenon now...
Kessler: That's right. And by the way, I will say this about the IPC meetings: They seem to be getting better and better in terms of organization, in terms of the technology related to the meeting, the websites, etc. I'm very pleased at what I did over the years at IPC. I think the technology is way, way beyond me at the moment. It was normally slightly ahead of me, but now... [laughs]
I just had a conversation with a visitor from Europe, regarding the difference in the levels of technologies, while looking at the people in the hall of fame and what they're noted for. They have me down as having expertise in raw materials.
Goldman: From your affiliation with Mica Corporation?
Kessler: At Mica, yes. But the raw material was limited at the time, very limited. You had a paper base that we did not manufacture and of which I knew nothing. We had epoxy paper, epoxy glass, and we were just introducing, as advanced materials, polyimide, and some people were playing with Teflon, but that was the extent of it. Today the technology is far broader and far more advanced, and so I come here with a great deal of admiration for the progress, as an industry, that we have made. And I enjoy having been at the beginnings, where life may have been a hell of a lot more hectic, but, I suspect, much simpler.
Goldman: I think you’re right, Bernie. I’m glad we had this chance to talk. Thanks so much for sharing your story of the early days.
Kessler: You are very welcome.
Page 2 of 2Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.
Electronics Industry Warns Mexico Tariffs Could Undercut U.S. Manufacturing and Supply Chain Resilience
10/24/2025 | Global Electronics AssociationAs negotiations over U.S.–Mexico trade policies near an October 29 deadline, the Global Electronics Association released a new policy brief, From Risk to Resilience: Why Mexico Matters to U.S. Manufacturing.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.