Dan’s Biz Bookshelf: ‘In Defense of a Liberal Education’
American Made Advocacy: A Growing Presence in Washington in Turbulent Times
Flexible and Stretchable Circuit Technologies for Space Applications
June 19, 2015 | M. Cauwe, F. Bossuyt, J. De Baets, and J. Vanfleteren, Laboratory for Advanced Research in Microelectronics (imec) Ghent UniversityEstimated reading time: 2 minutes
Flexible and stretchable circuit technologies offer reduced volume and weight, increased electrical performance, larger design freedom and improved interconnect reliability. All of these advantages are appealing for space applications. In this paper, two example technologies, the ultra-thin chip package (UTCP) and stretchable moulded interconnect (SMI), are described. The UTCP technology results in a 60μm thick chip package, including the embedding of a 20 μm thick chip, laser or protolithic via definition to the chip contacts and application of fan-out metallization. Imec’s stretchable interconnect technology is inspired by conventional rigid and flexible printed circuit board (PCB) technology. Stretchable interconnects are realized by copper meanders supported by a flexible material (e.g., polyimide). Elastic materials, predominantly silicone rubbers, are used to embed the conductors and the components, thus serving as circuit carrier. The possible advantages of these technologies with respect to space applications are discussed.
The driving application for flexible and stretchable circuit technologies is consumer electronics, especially handheld and mobile devices, which benefit the most from the reduction in form factor, the increased functional density and enlarged user comfort that is made possible with these technologies. Reduced volume and weight, increased electrical performance, larger design freedom and improved interconnect reliability are benefits that are also appealing for space applications.
Traditionally, electronics and sensor circuits are fabricated on flat rigid substrates, like FR-4 PCBs. In this conventional technology, packaged integrated circuits (ICs) and passive components are assembled onto the rigid PCB by soldering. For many applications, especially for mobile, portable, wearable and implantable electronics, the circuit should preferably be seamlessly integrated into the object that is used for transportation, is carried along, or worn on or inside the body. The electronics should be comfortable and unnoticeable to the user. In general, standard circuits do not fulfil these requirements. The user comfort can be increased in two ways. Extreme miniaturisation of the circuit reduces the presence of the system. A second approach is to transform the flat rigid circuit into a three-dimensional, conformable variant, following the random shape of the object or body part onto which it is integrated.
In this contribution, two original technologies developed at imec-CMST are presented. The ultra-thin chip package (UTCP) technology embeds 20–30 μm thick chips in a stack of spin-on polyimide (PI) layers. Adding thinfilm, fan-out metallization results in an extremely miniaturized, lightweight and flexible chip package with a total thickness below 100μm. Next to flexible electronics, a number of technologies for dynamically or one-time deformable stretchable circuits are under development. The stretchable concept is based on the interconnection of individual components or component islands with meander shaped metal wirings and embedding in elastic polymers like silicone rubbers (PDMS), polyurethanes (PU) or other plastics.
Editor's Note: This article originally appeared in the June 2015 issue of The PCB Magazine.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/01/2025 | Nolan Johnson, I-Connect007We start with the latest report from the Global Electronics Association: North American PCB sales are down 8.6% in June. That might sound grim, but keep reading—there’s more to the story. Bookings are holding steady, and Dr. Shawn DuBravac offers context that paints a more balanced picture. Next, we turn our gaze to India, where mobile phone exports have surged 127-fold over the past decade. That stat alone says volumes about India’s emergence as a force in electronics manufacturing, something we’ll be digging into more deeply in an upcoming SMT007 feature.
iDEAL Signs Technology Partner Agreement for SuperQ MOSFETs with Power System Specialist Richardson Electronics, Ltd.
08/01/2025 | PR NewswireiDEAL Semiconductor, a fabless power semiconductor company focused on delivering breakthrough efficiencies, has announced it will partner with Power and RF specialist, Richardson Electronics.
Brent Laufenberg Appointed CIO of the Global Electronics Association, Advancing Technology and Member Services
07/31/2025 | Global Electronics AssociationThe Global Electronics Association (formerly IPC International Inc.) announces the appointment of Brent Laufenberg as its new Chief Information Officer (CIO).
Federal Electronics Mexico Enhances SMT Line with Installation of Heller Industries Reflow Oven
08/01/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has enhanced its surface mount technology (SMT) operations with the installation of a new Heller Industries reflow oven at its facility in Hermosillo. This upgrade supports the company’s continued growth in high-reliability markets such as aerospace, medical, industrial, and instrumentation.