Flexible Thinking: Rules of Thumb—A Word to the Wise
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
Insulectro, Oak-Mitsui, and CAC Create Landmark Partnership
June 22, 2015 | InsulectroEstimated reading time: 4 minutes
Insulectro, a leading supplier of materials for use in the PCB and printed electronics industries, announced a breakthrough partnership to supply world-class performance copper foils manufactured by Oak-Mitsui throughout North America.
Beginning in July, Insulectro will provide copper foil manufactured by Oak-Mitsui for the PCB outer-layer market requirements. This strategic move will provide long-term sustainable domestic foil to PCB fabrication customers.
In addition, CAC, Inc. will now manufacture its CAC (Copper-Aluminum- Copper) bonded product with Oak-Mitsui copper Foil. CAC products will continue to be distributed through its global distribution partners, including Insulectro.
“I am proud to announce the addition of Oak-Mitsui copper foil to the Insulectro family of high performance materials. Oak-Mitsui is a globally recognized leader in copper foils to the electronics industry and this partnership provides our customers domestically produced products with a more reliable supply chain,” announced Insulectro CEO Tim Redfern. “We will offer Oak-Mitsui’s entire copper product portfolio – from very thin foils to specialty treatments – for today’s challenging adhesion applications. I’m sure our customers will appreciate the net effect of this deal – we’re bringing the highest quality copper to our customers utilizing our US network of ten stocking locations.”
Ken Parent, VP of Sales for Insulectro stated, “The addition of these high performance HTE foils to our line card is very exciting. It significantly enhances our product offering to customers needing adhesion, thin foil or thermally reliable copper.
The foils’ very low profile makes it perfect for thin dielectrics and fine-line applications. It’s natural that Oak-Mitsui copper foils would be a good fit with Insulectro. OakMitsui is well known and highly respected throughout the PCB marketplace. In addition to strong brand identity and market leader, they are known for their high quality, madein-America products.
John Fatcheric, Oak-Mitsui COO said, “This partnership with Insulectro strengthens our ability to supply and service the US PCB market. Oak-Mitsui is committed to maintaining a US manufacturing base and supplying the highest quality copper foil products to meet today’s and tomorrow’s PCB requirements.”
CAC Inc. President Patrick Redfern commented, “We are excited to integrate the Oak-Mitsui materials into our bonded CAC products. While copper supply has recently been inconsistent and over dependent on copper from foreign sources, our efforts together with Oak and Insulectro will help to stabilize the supply chain and directly benefit our customers with American products that are stocked geographically throughout the United States.”
Oak-Mitsui was incorporated in 1976 between Oak industries, Mitsui Mining and Smelting of Japan, and Anaconda. It was one of only three major companies in the United States manufacturing ultrathin copper foil for the printed circuit business. Over the years, the business has grown to become a leader in the supply of copper foil for the printed circuit board business in the U.S. Today, Oak-Mitsui is a wholly owned subsidiary of Mitsui Kinzoku, the world leader in electrodeposited copper foil and is the only electrodeposited copper foil manufacturer in the US & North America.
John Blaber, Senior VP of Sales & Marketing at Oak-Mitsui commented “The addition of Insulectro to our supply team gives PCB customers new options for copper foil products. We are excited about the new opportunities this new relationship offers. Both Oak-Mitsui and Insulectro are committed to the supply and support of US made products.”
“Fabricators can expect to see Oak-Mitsui™ copper foils in our inventory by July 1, 2015. Over the next three months, we will be transitioning our existing copper foil customers to Oak-Mitsui product as well as welcoming new customers to the Insulectro family,” Parent concluded.
About Insulectro
Insulectro (www.insulectro.com) is the leading supplier of PCB and printed electronics materials used to manufacture circuit boards. Insulectro combines its premier product offering with local inventory in 10 strategic stocking locations across the country, fabrication capabilities and backed up by expert customer and technical support services. Insulectro supplies advanced engineered materials manufactured by DuPont®, Isola, LCOA®, CAC, Inc., Ormet Circuits, Pacothane, Circuit Foil, and Focus Tech. These products are used by our customers to fabricate complex, multilayer circuit boards.
Insulectro serves a broad customer base manufacturing rigid, rigid/flex and flexible circuit boards for applications in a variety of end markets including telecom, data communications, high speed computing, mobile devices, military, and medical.
About Oak-Mitsui
Oak-Mitsui is recognized as the technological leader in the manufacture of high-quality electrodeposited copper foils for the printed circuit board industry. With the strength of international scope, Oak-Mitsui produces both conventional cladding and application specific copper foils required by technology's leading edge companies. At Oak-Mitsui, copper foils are electroformed on revolving titanium drums, unique for the ability to deposit copper foils with a high-quality surface. Electroformed foils are then subjected to a variety of surface treating operations contingent upon end-use requirements. During treating, copper dendrites are deposited onto the foil surface to enhance bonding to B-staged resins upon lamination. A "barrier-layer" is deposited for promoting reliability in thermal applications, specific proprietary organic layers are applied to promote chemical adhesion, and foils are stain-proofed to prevent oxidation in shipping, storage, lamination and post-bake cycles.
About CAC, Inc.
CAC, Inc. is a manufacturer of CAC® (Copper Aluminum Copper). Its licensed and patented products feature copper foil attached in its state-of-the-art clean room to one or both sides of an aluminum separator sheet based on the PCB application. CAC provides superior surface quality, important to producers of increasingly high technology printed circuit boards as well as offering labor and material cost savings. CAC’s proprietary process ensures particle and dent-free copper surfaces. It is the best and most economical solution for using difficult to handle thin foils, reverse treated and double treated copper foils.
Share on:
Suggested Items
Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
11/27/2024 | Team NCAB -- Column: Fresh PCB ConceptsElectric vehicles (EVs), powered by electricity rather than fossil fuels, are transforming transportation and reducing environmental impacts. But what good is an EV if it can't be easily charged? In this month's column, Ramon Roche dives into the role of printed circuit boards (PCBs) in electric vehicle charging (EVC)—and the design considerations.
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.