American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Defense Speak Interpreted: JADC2—Why It’s More Relevant Than Ever in Drone Warfare
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
Perovskite Photovoltaics Excitement
September 21, 2015 | IDTechExEstimated reading time: 2 minutes
Perovskite photovoltaics efficiency gains are double those of organic PV, exciting researchers from KIMM in Korea to Dyesol in Australia. However, it is like the little girl, "When she was good she was very, very good and when she was bad she was awful". Perovoskite photovoltaics promises over 20% efficiency, low cost materials and even flexible, transparent and stretchable versions dearly needed for new applications. Record power to weight ratio is needed for the electric vehicle end game, the land vehicles, boats and aircraft described in the IDTechEx report, Energy Independent Vehicles 2016-2026.
Ultrathin, flexible, stretchable and lightweight versions have been produced by Johannes Kepler University in Austria powering a miniature aircraft and airship. With 100% yield, exhibiting 12% efficiency they are only 3μm thick and weigh 5.2g m-3. Organolead halide perovskites are promising because they absorb light more efficiently: thinner layers are needed. Researchers suggest it could power EIVs as robotic insects and drones, and its flexibility and stretchability could be useful in bio-electronics.
But when she was bad she was awful. PbI, one of the breakdown products of the perovskite, is both toxic and carcinogenic. A glass panel can be made hermetically sealed, but plastics can be easily pierced. We need a barrier layer to make flexible versions last for 5- 10 years, and yet still not be that much heavier and even then it will not be chewable by children as required for packaging and toys. OPV will be better for that.
The new IDTechEx report, The Rise of Perovskite Solar Cells 2015-2025 External Link finds that the stability of perovskite cells under ambient conditions is a persistent problem. The perovskite decomposes in the presence of water and the decay products attack metal electrodes. Heavy encapsulation to protect perovskite can add to the cell cost and weight. Water vapour penetrating the perovskite can produce reactive iodides that rapidly corrode the metal electrodes.
Progress is being made. New perovskite solar cells with 16% efficiency have been developed by researchers from Switzerland and China. Stable and moisture resistant, they overcome some of the problems of perovskites. An interlayer protects the metal, allowing the cells to preserve their efficiency for two days. The resulting solar cell has greatly enhanced stability because of stabilising crosslinks in the material. These are formed by the phosphonic acid ammonium additive hooking together the perovskite crystallites through strong hydrogen bonding with the phosphorus and nitrogen-containing terminal groups of the linker molecule. The team explains that the additive allows the perovskite to be incorporated uniformly within and on the surface of a mesoporous titanium dioxide scaffold material. This nearly doubles the efficiency from 8.8 to 16.7% and it makes it moisture resistant, as the cations passivate the surface and render it inaccessible to water molecules. Next, the hysteresis in the J-V curves will be removed enhancing efficiency.
On the other hand, IDTechEx advises that lead free perovskites in photovoltaics have very low efficiency but the many other benefits may find them a market slot and they will be improved in efficiency in due course. All this will be covered by IMEC of Belgium, IDTechEx and others in presentations and masterclasses at the IDTechEx Show! External Link November 18-19 in Santa Clara California. It has 3000 paying delegates, 250 exhibitors and 23 masterclasses. Eight parallel conferences include "Energy Harvesting and Storage", "Photovoltaics" and "Electric Vehicles: Everything is Changing".
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
08/26/2025 | John Watson -- Column: Elementary, Mr. WatsonI’d like to share a harsh truth, and I say this as a friend: PCB designers are often their own worst enemy. It’s rarely the complexity of the circuit, the last-minute changes from mechanical, the limited enclosure space, or the ever-expanding list of design rules that send projects to the dust heap of failed boards. More often, it's our own decisions, made too quickly and narrowly, and with too little foresight, that sabotage an otherwise good design.
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
08/25/2025 | Dan Beaulieu -- Column: It's Only Common SenseIt’s been 20 years and 1,000 columns since I published my first monthly edition called “It’s Only Common Sense” on Sept. 5, 2005. I had only written 10 columns when I realized I couldn’t be confined to once a month. I simply had too much to say. So, on July 31, 2006, I started writing once a week, and let me tell you, that’s a lot of Mondays spent thinking, listening, watching, and writing about this wild, brutal, and beautiful industry we call the printed circuit board business.
SMT Perspectives and Prospects: Warren Buffett’s Perpetual Wisdom, Part 2
08/13/2025 | Dr. Jennie Hwang -- Column: SMT Perspectives and ProspectsOver the years, I have cherished the lessons by Warren Buffett and Charlie Munger at the Berkshire Hathaway annual shareholders meeting in Omaha, Nebraska. This year, I was among the more than 40,000 who attended the May 3 meeting. Millions more from around the world, including from the UK, Germany, Japan, China, Panama, and Guatemala, tuned in remotely and via CNBC’s livestream. This is the second of a two-part series on the Berkshire Hathaway annual shareholders meeting
It’s Only Common Sense: Stop Chasing New Customers and Start Keeping the Ones You Have
08/11/2025 | Dan Beaulieu -- Column: It's Only Common SenseCustomer retention is not glamorous. It doesn’t have a flashy ad campaign, it’s not going viral on social media, and nobody’s handing out “Best in Retention” awards at trade shows. However, if you’re running a proper business, not a popularity contest, then customer retention is where you make your money. However, too many companies treat customer retention as an afterthought.
KYZEN to Feature CYBERSOLV 141-K and KYZEN E5631J at SMTA Michigan Expo and Tech Forum
08/05/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Michigan Expo and Tech Forum, scheduled to take place Tuesday, August 19, 2025 at Laurel Manor in Livonia, Michigan. During the event, the KYZEN Clean Team will highlight precision aerosol cleaner CYBERSOLV 141-K and understencil cleaner KYZEN E5631J.