New 3-D Printing Method Creates Complex Micro Objects
November 3, 2015 | UCLAEstimated reading time: 3 minutes
Bioengineers from the UCLA Henry Samueli School of Engineering and Applied Science have developed a new method of 3-D printing that allows production of complex micro-scale objects smaller than the width of a human hair. The technique, using patterned ultraviolet light and a custom-shaped flow of polymer material, creates 3-D objects that can be first designed with software and could be used in a variety of biomedical and industrial applications.
The research was published online in the journal Advanced Materials.
The authors suggest that producing 3-D shapes at the micro scale could be useful for designing custom biomaterials such as interlocking particles that self-assemble to help tissue regenerate, or for industrial applications such as creating new coatings and paints with unique light-reactive properties.
“We know that shape often determines material function, so while we have a few ideas of what this could lead to, this fundamental capability to produce made-to-order 3-D microparticles could be applied in ways we have not contemplated,” said Dino Di Carlo, the principal investigator on the research and a professor of bioengineering at UCLA. “There are so many potential applications — in that sense, it’s really exciting.”
In 3-D printing, a digital blueprint is used to fabricate a wide range of products. The most common method, known as additive fabrication, uses a liquid precursor material that squeezed out of a nozzle, drop by drop. As the liquid hardens, new layers are added until the object is finished. While this and other 3-D printing methods can make shapes with incredible complexity, researchers have not been able to make similarly complex objects smaller than a millimeter because the drops of material are too big.
To make smaller custom objects with folds, holes and other precise features, the UCLA team developed a new technique called optical transient liquid modeling. It uses a series of microfluidic and optical technologies, including a technique previously developed by Di Carlo’s research group that simplifies designing the shape of fluid flows.
First, two different types of fluids are combined in a series of tiny pillars that control the shape of the merged fluids. One fluid is a liquid polymer that is the precursor material for the object. The other essentially acts as a liquid mold for the polymer stream. The arrangement of the pillars determines how the two flows mix and intertwine. The researchers used software that they previously developed to rapidly predict what shape will be produced by altering the pillars’ location and sequence. It can be downloaded for free here.
When the flow of materials is stopped rapidly, an outlined pattern of ultraviolet light — somewhat like a cookie cutter — slices into the precursor stream. So the object is shaped first by the stream, then again by UV light. The UCLA researchers have reached printing speeds of nearly one object every five seconds.
“It’s like we squeeze dough through a mold, which is the liquid mold, to make a noodle and then cut the noodle into pieces using another mold — the patterned UV light,” said Chueh-Yu “Jerry” Wu, the lead author of the research and a graduate student in in Di Carlo’s biomicrofluidics lab.
The objects the team has produced are about 100–500 micrometers in size, with features as small as 10–15 micrometers. With this method, they have produced objects composed of organic materials as well as particles whose movements and position could be precisely controlled by magnetism.
Keegan Owsley, another graduate student in Di Carlo’s lab, is also a co-author of the research.
The research was partially supported by the National Science Foundation. Di Carlo is also a member of the California NanoSystems Institute.
Suggested Items
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
IDTechEx Discusses the Role of Printed Sensors in Mass-Digitization
04/11/2024 | PRNewswireIntegrated sensors digitizing physical interactions are vital in everyday life. From personalized user experiences to warehouse inventory management, data-driven insights are driving demand for smarter sensors — and lots of them.
A Closer Look at Professional Development at IPC APEX EXPO 2024: 3D Printing and AI
04/09/2024 | I-Connect007 Editorial TeamWhile the finishing touches were being made to the show floor at IPC APEX EXPO, just as much activity was happening in the conference rooms of the Anaheim Convention Center on the days before the show officially opened. The hallways and classrooms were filled for standards committee development meetings and Professional Development Courses, and IPC hosted evening receptions for Emerging Engineers, ECWC, and those who are attending for the first time in a special “newcomers” event.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
DARPA Explores Additive Manufacturing’s Revolutionary Potential for Futuristic Microsystems
03/12/2024 | DARPADARPA played a seminal role in establishing materials science as a discipline. One of the latest disruptive efforts in new materials and applications, the Additive Manufacturing of Microelectronic systEms (AMME) program, seeks to launch microsystems manufacturing far beyond today’s state of the art.