American Made Advocacy: A Growing Presence in Washington in Turbulent Times
Punching Out: M&A North American PCB and EMS Deals for the First Half of 2025
Flex Talk: Thoughts on the IPC Flexible Circuits–HDI Forum
November 19, 2015 | Tara Dunn, OMNI PCBEstimated reading time: 4 minutes
As an attendee at the IPC Flexible Circuits–HDI Conference held October 28–30, I found myself in a room full of people, all eager for technical information, with the opportunity to reconnect with industry friends and to make new connections. The audience was diverse with young people, new to our industry, sitting alongside industry veterans willingly sharing their knowledge and passion for HDI design and flexible circuit technology. The conference kicked off with intermediate level, half day tutorials on both flexible circuit design and HDI. The second and third days provided advanced level speaker presentations in 45-minute segments allowing time to digest the information, speak further with the presenters and network with industry peers.
Two comments made early in the technical conference solidified an event message in my mind. Event Chair Mike Carano, with RBP Chemical Technology, commented in his opening remarks that networking is one the greatest opportunities available with IPC. Brad Bourne of FTG gave the keynote presentation, “Organizational Commitment to High Reliability.” He presented the message that PCB reliability goes way beyond the manufacturing of the printed circuit board. Everyone in the industry impacts reliability: circuit board designers, raw material suppliers, fabricators, contract manufacturers and end users of the product.
Following the opening keynote, we were treated to a presentation by Andrew Schimmoeller and Jeffrey Friend of the Battelle NeuroLife Project. Their riveting presentation explained the use of flexible circuits in the design of a neurological stimulation system that re-animated a paralyzed hand, controlled by patient thoughts. I have re-watched the short video on this topic several times since the event. This is an inspiring example of the things our industry can accomplish by working together.
Throughout the conference, there were several presentations addressing flex and rigid-flex, including: design rules for flex performance, high-reliability flex and rigid flex, flex vs. flexibility and new developments in HDI technology. Beyond fabrication and design related information, we also learned of unique challenges with flex and rigid-flex in terms of stack up and impedance, reducing fabrication challenges with new materials, metallization for HDI and flex circuit technology. The amount of relevant technical knowledge disseminated in a short time period was staggering. I was continually reminded of the power of the combined knowledge of our speakers.
While many of the presentations detailed proven technology, reliability data and design criteria, we also learned of exciting emerging technologies including the latest developments in thin film metallization and via filling and a novel new approach for applying metallization to ultra-thin substrates. It will be interesting to follow these new technologies and see how they develop over the next few years.
Page 1 of 2
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.
From Attraction to Action: Where Marketing Ends and Sales Begins
07/29/2025 | Brittany Martin, I-Connect007Before a PO hits the system, marketing has already done a lot of heavy lifting. Without strategic marketing, the PO might never arrive. At I-Connect007, we have been fortunate to help many companies achieve sales success through marketing. The key to success? Understanding how marketing leads to sales.
American Made Advocacy: A Growing Presence in Washington in Turbulent Times
07/29/2025 | Shane Whiteside -- Column: American Made AdvocacyLast month, PCBAA held its fourth annual meeting in Washington, D.C. It was our largest gathering to date and included speakers from the House and Senate, the Department of Commerce, and OEMs Lockheed Martin, RTX, and Northrop Grumman. We also spent a day on Capitol Hill educating lawmakers and their staff about the importance of a secure domestic microelectronics supply chain.
TSMC’s Dr. C.C. Wei and Dr. Mark Liu to Receive SIA’s Highest Honor
07/28/2025 | SIAThe Semiconductor Industry Association (SIA) announced Dr. C.C. Wei, TSMC’s Chairman and CEO, and Dr. Mark Liu, TSMC’s Former Chairman and Former President & Co-CEO, have been selected as the 2025 co-recipients of our industry’s highest honor, the Robert N. Noyce Award.
Beyond Recycling: Reshaping Sustainability in Electronics
07/24/2025 | Marcy LaRont, PCB007 MagazineEnvironmental sustainability, especially for carbon-intensive industries like electronics manufacturing, means businesses are often plagued with various reporting requirements that don’t necessarily address the root problem. To that end, SERI and the Global Electronics Association are teaming up to reshape sustainability in electronics.