Dymax White Paper Explains Switching from Conventional Lamp to LED Light-Curing Sources
November 23, 2015 | Dymax CorporationEstimated reading time: 1 minute
Dymax Corporation’s new white paper, Ensuring Success When Switching from Conventional Lamp to LED Light Curing Sources, discusses topics such as how LED curing works, the advantages to LED curing, and getting enough information to switch successfully. LEDs, or light emitting diodes, continue to gain popularity as a replacement for traditional light bulbs, not only in homes and public buildings, but also for use with light-curable materials (LCMs). Because of the differences in the technology, making the switch from broad spectrum to LED-curing energy sources is seldom a matter of simply replacing conventional lamps with LED units.
Success when switching to an LED system depends on careful consideration of all the factors involved, from the LCM to the curing unit selected for the application. With attention to detail and proper compatibility of all components, along with sufficient adjustments to manufacturing processes, it is certainly possible to enjoy a smooth transition to the benefits of LED light-cure technology. To find out how, download the white paper at www.dymax.com.
Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets. The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs. Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.
For additional information, visit www.dymax.com or contact Dymax Application Engineering at info@dymax.com or 860-482-1010.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Shane Whiteside of Summit Reflects on Today's PCB Landscape
05/08/2024 | I-Connect007 Editorial TeamSummit Interconnect began as a printed circuit board manufacturing company just eight years ago and has seen impressive growth organically and through acquisition. Summit President and CEO Shane Whiteside takes a few moments to share his thoughts on the growing PCB industry in the United States.
America Projected to Triple Semiconductor Manufacturing Capacity by 2032, the Largest Rate of Growth in the World
05/08/2024 | SIAThe Semiconductor Industry Association (SIA), in partnership with the Boston Consulting Group (BCG), released a report on the global chip supply chain that projects the United States will triple its domestic semiconductor manufacturing capacity from 2022—when the CHIPS and Science Act (CHIPS) was enacted—to 2032.
Coherix Partners with EMU on 'Factory of the Future' Technology Program
05/08/2024 | PRNewswireMichigan-based Coherix is working with Eastern Michigan University (EMU) in Ypsilanti to develop "factory-of-the-future" manufacturing and assembly technology.