U.S. Air Force Awards Lockheed Martin $302M for JASSM and JASSM-ER Production
December 29, 2015 | Lockheed MartinEstimated reading time: 1 minute
Lockheed Martin has received a $302.2 million contract from the U.S. Air Force for continued production of the Joint Air-to-Surface Standoff Missile (JASSM) and its Extended Range (ER) version.
The Lot 14 contract includes 146 baseline JASSMs for U.S. and international partners, 140 JASSM-ER missiles for the U.S., as well as data, tooling and test equipment. The award brings the total number of missiles under contract to more than 2,600.
“This Lot 14 contract continues to demonstrate how important JASSM’s capability is to strategic defense planning,” said Jason Denney, program director of long-range strike systems at Lockheed Martin Missiles and Fire Control. “Lots 13 and 14 were negotiated together, resulting in cost savings that led to more affordable missiles for our customers.”
The contract represents the sixth production order for JASSM-ER, which received full-rate production approval in 2014. Recent program milestones include the $305.4 million Lot 13 contract award in October 2015 and a Foreign Military Sales contract to integrate JASSM onto Poland’s F-16C/D aircraft.
Armed with a penetrating blast-fragmentation warhead, both missiles can be used in all weather conditions. They share the same powerful capabilities and stealth characteristics, though JASSM-ER has more than two-and-a-half times the range of JASSM for greater standoff capability. The 2,000-pound cruise missiles employ an infrared seeker and enhanced digital anti-jam GPS receiver to dial into specific points on targets.
Effective against high-value, well-fortified, fixed and relocatable targets, JASSM is integrated on the U.S. Air Force’s B-1B, B-2, B-52, F-16 and F-15E. The B-1B also carries JASSM-ER. Internationally, JASSM is carried on the F/A-18A/B and the F-18C/D aircraft.
Produced at the company’s manufacturing facility in Troy, Alabama, more than 1,800 JASSMs have been delivered.
About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that – with the addition of Sikorsky – employs approximately 126,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
Suggested Items
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.