New Chips Ease Operations In Electromagnetic Environs
January 12, 2016 | DARPAEstimated reading time: 2 minutes
Competition for scarce electromagnetic (EM) spectrum is increasing, driven by a growing military and civilian demand for connected devices. As the spectrum becomes more congested, the Department of Defense (DoD) will need better tools for managing the EM environment and for avoiding interference from competing signals. One recent DARPA-funded advance, an exceptionally high-speed analog-to-digital converter (ADC), represents a major step forward. The ADC could help ensure the uninterrupted operation of spectrum-dependent military capabilities, including communications and radar, in contested EM environments. The advance was enabled by 32 nm silicon-on-insulator (SOI) semiconductor technologies available through DARPA’s ongoing partnership with GlobalFoundries, a manufacturer of highly-advanced semiconductor chips.
The EM spectrum, whose component energy waves include trillionth-of-a-meter-wavelength gamma rays to multi-kilometer-wavelength radio waves, is an inherently physical phenomenon. ADCs convert physical data—that is, analog data—on the spectrum into numbers that a digital computer can analyze and manipulate, an important capability for understanding and adapting to dynamic EM environments.
Today’s ADCs, however, only process data within a limited portion of the spectrum at a given time. As a result, they can temporarily overlook critical information about radar, jamming, communications, and other potentially problematic EM signals. DARPA’s Arrays at Commercial Timescales (ACT) program addressed this challenge by supporting the development of an ADC with a processing speed nearly ten times that of commercially available, state-of-the-art alternatives. By leveraging this increased speed, the resulting ADC can analyze data from across a much wider spectrum range, allowing DoD systems to better operate in congested spectrum bands and to more rapidly react to spectrum-based threats.
How fast is fast? The new ADC samples and digitizes spectrum signals at a rate of over 60 billion times per second (60 GigaSamples/sec). That’s fast enough to directly detect and analyze any signal at 30 GHz or below—a range that encompasses the vast majority of operating frequencies of interest. Whereas scanning through these frequencies today requires costly application-specific hardware with long development cycles, the new ADC can provide a “one-stop shop” for processing radar, communications and electronic warfare signals.
Page 1 of 2
Suggested Items
UHDI Fundamentals: UHDI Applications for Wearable Electronics
05/31/2024 | Anaya Vardya, American Standard CircuitsWearable electronics is a type of technology that can be worn on the body and often integrated into clothing or accessories. These devices typically offer functionalities beyond traditional clothing, such as monitoring health metrics, providing notifications, or enhancing communication. Ultra high density interconnect (UHDI) has several potential applications in wearable electronics, primarily in enhancing visual experiences, data analysis, and communication.
Bell Awarded Funding for Phase 1B of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
05/30/2024 | BellBell Textron Inc., a Textron Inc. company, has been down-selected for Phase 1B of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program.
AIM Solder Joins International Electronics Manufacturing Initiative (iNEMI)
05/29/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is proud to announce its membership with the International Electronics Manufacturing Initiative (iNEMI).
Saying ‘Yes’ to Additive Technology at Winonics
05/28/2024 | Marcy LaRont, PCB007 MagazineCalifornia-based PCB manufacturer Winonics has been on a journey to develop additive manufacturing technology that can go the distance. CEO Dennis Brown, Director of Technology Gary Abel, and VP of Operations Sidali Koulougli discuss the company’s history, acquisition strategy, and investment in new equipment, as well as highlight their R&D efforts in additive manufacturing. The team's commitment to quality, customer service, and flexibility as a smaller, nimbler company is part of what makes it a go-to PCB manufacturer for the projects that others turn away.
Delving Into Special Sessions at IPC APEX EXPO 2024
05/28/2024 | Happy Holden, I-Connect007Once again, we were back at IPC APEX EXPO for another show and conference, and back to gathering in the Anaheim Convention Center. With Disneyland just across the street, there were tourists everywhere. This APEX EXPO was bigger than ever, with more activities, Professional Development Courses, standards committee meetings, and the 16th Electronic Circuits World Convention. I really enjoyed walking around and seeing everything the show had to offer.