The Government Circuit: News on Defense Electronics, Europe, and Sustainability
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
High-Performance Laminates
February 17, 2016 | Karl Dietz, Karl Dietz Consulting LLCEstimated reading time: 1 minute
For the purpose of this column, high-performance laminates are characterized as base materials that in one or more aspects exceed the performance of FR-4, CEM, or paper/phenolic laminates. The focus, however, is on low loss (Df), low Dk dielectric resin-based CCLs and prepregs. Included are laminates that distinguish themselves through higher Tg, better chemical stability, better dimensional stability, or some other performance factor. Polyimide-based flex laminates are covered briefly. Requirements for dielectrics specifically developed for HDI boards or flip chip packages, such as dielectric films for microvia build-up layers, laser-drillable prepregs, and various forms of RCC for rigid cores, are briefly mentioned to contrast these requirements to high-performance CCLs for second level packaging.
Market Overview—Applications
The applications for high-performance laminates are quite diverse and evolving rapidly. Low Dk and/or Df are common performance requirements in addition to many others that are shared with various applications. The high-performance laminate applications include:
• Cellular base station infrastructure (e.g., base station power amplifiers)
• LNBs (low-noise block down-converters)
• Cavity PCBs
• HF antennas
• High-speed digital backplanes
• High-speed routers
• High-speed servers
• High-speed test PCBs
• RF and HF microwave boards and modules
• High-speed chip packages
• Optoelectronic devices
• Satellite TV infrastructure
• Automotive collision avoidance systems
The automotive collision avoidance applications appear to be the highest frequency application at 40 GHz and above (current state-of-the-art radar chip systems, 77 GHz), and have a very high growth rate. It also demands dielectrics with very low loss.
Following is a list of commercial high-performance laminate constructions/compositions, as provided by the manufacturers:
• Woven E-glass/PPO
• BT/epoxy
• Woven E-glass/high-speed, low-loss epoxy
• Woven SI-glass, APPE thermoset resin
• Woven E-glass, ceramic filled thermoset hydrocarbon (polybutadiene)
• Woven SI-glass/high-speed, low-loss epoxy
• Woven glass, ceramic filled PTFE
• Woven glass, ceramic filled thermoset
Editor's Note: This article originally appeared in the January 2016 issue of The PCB Magazine.
Share on:
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Don’t Overconstrain Your Board Materials
07/02/2024 | I-Connect007 Editorial TeamWhen we started planning May’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation. What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards.
Underconstraining Your Materials? Leave It to the Experts
05/30/2024 | I-Connect007 Editorial TeamWith traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.