-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueVoices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
It's Show Time!
In this month’s issue of PCB007 Magazine we reimagine the possibilities featuring stories all about IPC APEX EXPO 2025—covering what to look forward to, and what you don’t want to miss.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Cicor Witnessed a Challenging 2015 Financial Year
March 9, 2016 | CicorEstimated reading time: 5 minutes
Cicor, a leading international high-tech industrial group in the field of printed circuit boards, microelectronics and electronic solutions based in Boudry (Switzerland), recorded lower sales as well as lower results in the 2015 financial year in comparison with the previous year. Net sales in Swiss francs in the year 2015 totaled 180.6 million, 10.8% less than in 2014 (CHF 202.5 million). In local currency terms, sales fell by 6.9%. Earnings before interest and tax (EBIT) were lower than in the previous year. EBIT before restructuring costs reached CHF 3.1 million (2014: CHF 10.2 million). EBITDA generated in the year 2015 before restructuring costs reached CHF 12.1 million (2014: CHF 19.7 million); the EBITDA margin before restructuring costs fell to 6.7% (2014: 9.7%) of net sales. Net profit in the 2015 financial year amounted to CHF 0.7 million before restructuring costs of CHF 4.7 million (net profit 2014: CHF 7.0 million) or CHF -4.1 million after taking restructuring costs into account. With an equity ratio of 39.5% and a slightly lower level of net debt in comparison with the previous year (2015: CHF 20.5 million / 2014: CHF 21.2 million), the Group continues to demonstrate a sound consolidated balance sheet. At the end of 2015 the Group Management also initiated targeted measures designed to return the Group to the path of growth as quickly as possible. Due to the results in the 2015 financial year, the Board of Directors will propose to the Annual Shareholders’ Meeting to forego the distribution of earnings.
2015 Financial Year
During the 2015 financial year the Cicor Group struggled with a difficult market environment in Switzerland. The abandonment of the minimum exchange rate between the Swiss franc and the euro unsettled many companies in Switzerland. As a consequence, some of Cicor's customers delayed or reduced their orders. The falling sales at two major customers also reduced the sales volume in 2015. The measures initiated had only a limited positive effect on the results.
Operating conditions for the market segments addressed by the Cicor Group varied in the 2015 financial year. The Swiss market, which is particularly important for the Group, was hit by the abandonment of the minimum exchange rate for the Swiss franc. In addition to the decline in sales at two major customers, competitive pressures in the European electronic manufacturing sector remained high in 2015. Demand in the U.S. and in Asian markets continued to grow. The Cicor Group's net sales in Swiss francs in 2015 totaled CHF 180.6 million, 10.8% less than in 2014 (CHF 202.5 mil-lion). Net sales in the ES Division fell 9.7% to CHF 131.6 million. EBITDA of the ES Division reached CHF 9.4 million before restructuring costs associated with the relocation of the Ticino sales office to the ES divisional headquarters in Bronschhofen, or CHF 8.9 million after taking this factor into account. On the basis of EBITDA before restructuring, this corresponded to a reduction of around CHF 4.5 million in comparison with the previous year 2014 (CHF 13.9 million). EBIT before the restructuring of the ES Division reached CHF 5.6 million, a significantly lower figure than in the previous year (2014: CHF 10.0 million). Sales recorded by the AMS Division in 2015 reached CHF 49.5 million, a 13.0% reduction in comparison with 2014. Orders from the watchmaking industry were particularly disappointing, confirming the continuing negative trend in this segment. The watches and consumer goods segment accounted for just 12% of the Cicor Group's total sales in the 2015 financial year. In the year 2012, by contrast, this accounted for some 20%. The AMS Division recorded EBIT of CHF -4.4 million (2014: CHF 2.3 million) after restructuring costs associated with the consolidation of the Cicorel SA site in Moudon with the site in Boudry. Before restructuring costs, operating results at the EBIT level totaled CHF -0.2 million, and at the EBITDA level CHF 4.9 million (2014: CHF 7.6 million).
The Cicor Group was able to demonstrate its capabilities and boost customer satisfaction even in the difficult 2015 financial year. A number of important new customers were acquired, enabling the focused medical and industrial segments to be expanded. The continued growth of the industry segment was welcomed, and this saw its share of sales rise from 27% in 2014 to 30% in 2015. This segment, together with the consistently strong market segment of medical, represents one of Cicor's core fields of activity. Demand for engineering support and product launch expertise as well as production design is particularly high in these segments, and is also continuing to rise. The joint market profile of the two Divisions was well-received by global customers, and has already begun generating joint orders. Incoming orders recorded in the year 2015 totaled CHF 176.3 million, a 9.4% reduction in comparison with 2014 (2014: CHF 194.7 million). Despite lower order intake, at the end of 2015 the Group had an order backlog with a delivery volume of CHF 103.2 million for from 2016 onwards.
Page 1 of 2
Suggested Items
Kaynes Technology Acquires Canada-Based August Electronics
05/09/2025 | PRNewswireAugust Electronics Inc. is pleased to announce that it has entered into a definitive agreement to be acquired by Kaynes Canada Limited, a wholly owned step-down subsidiary of Kaynes Technology India Limited, a leading Electronics System Design & Manufacturing (ESDM) company. The transaction is expected to close by the end of May 2025, subject to customary regulatory approvals and closing conditions.
It’s Only Common Sense: Stop Pitching, Start Listening
05/12/2025 | Dan Beaulieu -- Column: It's Only Common SenseThe best way to sell is to stop selling—meaning, instead of pushing your pitch, focus on listening to your customers. This simple but often overlooked shift can transform your sales approach and yield extraordinary results. Here’s why listening, not pitching, should be your top priority.
Scanfil Boosts Investment in Electronics Manufacturing in the US
05/08/2025 | BUSINESS WIREScanfil is investing in a second electronics manufacturing line in Atlanta, Georgia, USA. The demand for manufacturing electronics in the USA has increased over the past two years and is expected to continue growing.
Nortech Systems Unveils Reimagined Brand Identity
05/08/2025 | Nortech SystemsNortech Systems Incorporated, a leading provider of engineering and manufacturing solutions for complex electromedical and electromechanical products serving the medical, industrial and defense markets, is proud to unveil its newly refreshed brand, "Connections Reimagined."
Cybord's Visual AI Solution to Be Integrated with Siemens' Opcenter MES
05/07/2025 | PRNewswireCybord, a leading provider of advanced visual-AI electronic component analytics, and Siemens Digital Industries Software have signed a new OEM agreement to integrate Cybord's cutting-edge AI technology with Siemens' Opcenter™ software for Manufacturing Execution Systems (MES).