NASA Investigates 3-D Printing for Building Densely Populated Electronic Assemblies
April 26, 2016 | NASAEstimated reading time: 2 minutes
As detector assemblies get smaller and denser — packed with electronic components that all must be electrically connected to sense and read out signals — it’s becoming increasingly more challenging to design and manufacture these all-important instrument devices.
A team of NASA technologists at the Goddard Space Flight Center in Greenbelt, Maryland, however, has begun investigating the use of a technique called aerosol jet printing or direct-write manufacturing to produce new detector assemblies that are not possible with traditional assembly processes.
“If we succeed, aerosol jet technology could define a whole new way to create dense electronic board assemblies and potentially improve the performance and consistency of electronic assemblies,” explained Goddard technologist Beth Paquette, who is leading the R&D effort that began last fiscal year. Furthermore, aerosol jet printing promises to slash the time it takes to manufacture circuit boards, from a month to a day or two, she added.
Important Distinction
As with other 3-D printing techniques, aerosol jet manufacturing builds components by depositing materials layer-by-layer following a computer-aided design, or CAD, drawing. However, jet aerosol printing offers an important difference.
Instead of melting and fusing plastic powder or some other material in precise locations, as in the case of many 3-D printers, aerosol jet printing uses a carrier gas and printer heads to deposit a fine aerosol of metal particles, including silver, gold, platinum, or aluminum, onto a surface. Aerosol jet printers also can deposit polymers or other insulators and can even print carbon nanotubes, cylindrically shaped carbon molecules that have novel properties useful in nanotechnology, electronics, and optics.
“It can print around bends, on spheres or on something flat, or on a flexible surface, which then can be flexed into the shape you want,” she said.
These attributes make the technology ideal for detector assemblies, particularly those that need to be shaped differently or are very small, yet dense because of the large number of tiny components that must be electrically wired or linked together on a circuit board — an inescapable reality as instruments get smaller and smaller.
“We can make these wires microns in width,” Paquette said. “These lines are very small, down to 10 microns wide. These sizes aren’t possible using traditional circuit board manufacturing processes.” (By way of comparison, the average human hair measures between 17 and 191 microns in width.)
Page 1 of 2
Suggested Items
UHDI Fundamentals: UHDI Applications for Wearable Electronics
05/31/2024 | Anaya Vardya, American Standard CircuitsWearable electronics is a type of technology that can be worn on the body and often integrated into clothing or accessories. These devices typically offer functionalities beyond traditional clothing, such as monitoring health metrics, providing notifications, or enhancing communication. Ultra high density interconnect (UHDI) has several potential applications in wearable electronics, primarily in enhancing visual experiences, data analysis, and communication.
Bell Awarded Funding for Phase 1B of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
05/30/2024 | BellBell Textron Inc., a Textron Inc. company, has been down-selected for Phase 1B of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program.
AIM Solder Joins International Electronics Manufacturing Initiative (iNEMI)
05/29/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is proud to announce its membership with the International Electronics Manufacturing Initiative (iNEMI).
Saying ‘Yes’ to Additive Technology at Winonics
05/28/2024 | Marcy LaRont, PCB007 MagazineCalifornia-based PCB manufacturer Winonics has been on a journey to develop additive manufacturing technology that can go the distance. CEO Dennis Brown, Director of Technology Gary Abel, and VP of Operations Sidali Koulougli discuss the company’s history, acquisition strategy, and investment in new equipment, as well as highlight their R&D efforts in additive manufacturing. The team's commitment to quality, customer service, and flexibility as a smaller, nimbler company is part of what makes it a go-to PCB manufacturer for the projects that others turn away.
Delving Into Special Sessions at IPC APEX EXPO 2024
05/28/2024 | Happy Holden, I-Connect007Once again, we were back at IPC APEX EXPO for another show and conference, and back to gathering in the Anaheim Convention Center. With Disneyland just across the street, there were tourists everywhere. This APEX EXPO was bigger than ever, with more activities, Professional Development Courses, standards committee meetings, and the 16th Electronic Circuits World Convention. I really enjoyed walking around and seeing everything the show had to offer.