Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
Punching Out: Your Financial Preparation for a Sale
Nolan's Notes: The Next Killer App in Component Manufacturing
Solder Paste Exploration
June 2, 2016 | Stephen Las Marias, I-Connect007Estimated reading time: 1 minute
The trend towards miniaturization and increasing complexity of board assemblies as more functionality is being packed in smaller and smaller electronics devices no doubt continues to be among the critical issues in the electronics assembly industry today. Not to mention the ever-shrinking component sizes that are further complicating the manufacturing challenges.
To improve the electronics manufacturing process considering the challenges above, we have to drill down to the specific issues that have the greatest impact on the assembly line. And what better way to know these issues than to ask our readers?
So for this month's issue of SMT Magazine, we did a survey to find out the biggest factors affecting the electronics assembly process as the industry moves to tighter and tighter tolerances (finer lines and spaces). In our survey, we found out that while the most common line and space widths range from 2 mils to 5 mils, some respondents said they are doing boards with line and space widths down to 1 mil.
Given such tighter tolerances, respondents say PCBA testing and inspection, and soldering—in particular, solder paste printing—are their greatest challenge when it comes to electronics assembly.
This led me to what I would call my "solder paste printing exploration." From the manufacturers of solder pastes, to equipment makers, all the way to the solder paste inspection guys—and most importantly the electronics assemblers themselves who are using these products—I talked to the "supply chain," so to speak, all the way from Shanghai (during the recent NEPCON China 2016 exhibition in April) to our science and technology parks here in the Philippines, to find out what’s going on in the solder paste printing process, what factors impact the process, the challenges, and the best practices to consider to be able to address those challenges and improve efficiencies and yield in the SMT line.
Editor's Note: This article originally appeared in the June 2016 issue of SMT Magazine.
Share on:
Suggested Items
NCAB Acquires 100% of B&B Leiterplattenservice GmbH in Germany
04/23/2025 | NCABNCAB has signed an agreement to acquire 100 percent of B&B Leiterplattenservice GmbH (B&B) headquartered in Mittweida, west of Dresden. The company had net sales of around 150 MSEK in 2024 within the PCB trading with an EBITA exceeding SEK 20 million.
Unimicron Joins '2025 TALENT, in Taiwan' Initiative for Second Consecutive Year
04/10/2025 | UnimicronUnimicron has reaffirmed its dedication to talent sustainability and the cultivation of a diverse, equal, and inclusive workplace by joining the "2025 TALENT, in Taiwan, Taiwan Talent Sustainability Action Alliance" for the second consecutive year.
atg Luther Maelzer to Showcase Latest Generation Large Format Flying Probe Test Systems at IPC APEX EXPO 2025
03/11/2025 | atg Luther & Maelzeratg Luther Maelzer will showcase their latest technology, the A9L, at the upcoming IPC APEX EXPO. The A9L will be on display from March 18 – 20 at the Anaheim Convention Center in Booth 3934.
Gathering Around the EMS Table
03/11/2025 | Mark Wolfe, IPCWhen I entered the EMS provider industry 30 years ago, I attended some early IPC EMS management meetings. While I enjoyed the planned presentations, I especially valued the roundtable discussions with other industry peers. They not only provided an excellent opportunity to foster new relationships but also allowed me to listen to others facing similar challenges, who often addressed them in innovative ways that I could benefit from.
Koh Young Showcases Inspection Innovations at IPC APEX EXPO 2025 in Anaheim, California during March 18-20, 2025
03/10/2025 | Koh YoungKoh Young, the global leader in True3D measurement-based inspection solutions and the exclusive Premier Sponsor of IPC APEX EXPO 2025, invites electronics manufacturers to Booth 2130 for an in-depth look at its cutting-edge inspection technologies. Taking place at the Anaheim Convention Center from March 18–20, 2025, this year’s event highlights Koh Young’s continued advancements in AI-powered process optimization and quality assurance.