-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
The Sum of All Parts: The Fabricator-Assembler Connection
June 20, 2016 | Sam Sangani, PNC Inc.Estimated reading time: 3 minutes
After discussing the relationship between PCB fabricators and those who design the boards (see my previous column ), it is imperative to do the same for the relationship between assemblers and fabricators. This brings about a whole new set of potential complications.
For example, a board manufacturer may not fully understand the scope of panel size limitations for the SMT line in question or if rails are needed on individual pieces/panels so that the pick & place machine has sufficient room to place the components that are close to the board’s edge. You may also have a situation where a component overhangs off the edge of a board. To be sure in can be placed, if in panel form, then the panel array will need additional space between boards so there is no interference of the part to the next board in the array.
Logistical Challenges
The supply of parts is a very crucial element of this relationship. Most assembly houses do not stock an inventory of components for the simple fact that it does not make business sense; every customer will require different parts from job to job and revision to revision. For the assembler to purchase and sit on various parts they think their customers might need is essentially just an increase in toxic, unusable assets that hurt the bottom line. You might have capacitors, resistors etc., with the exact value your customers need, but if it is not made by the manufacturer they desire or supplied by their preferred vendor, the assembler is left with an unusable part.
However, if a board house also has the ability to assemble, it lends to a number of advantages. First and foremost, the customer is able to rely on an accurate and unchanging quote from their manufacturer/assembler. Furthermore, when the customer is given a date on which their job will be completed, their job is actually completed on that date. They are not waiting to receive the bare board from one place and then send it out to another place to be populated—at which time the wait begins all over again. The speed of this process—end to end—is also accelerated significantly.
Packaging and Cleanliness
This in crucial in today’s market when customers expect their boards to be pristine and understandably so. The packaging and shipping processes can cause unnecessary cosmetic and damage to the board. The boards should be vacuum sealed with desiccant. Desiccant is vital to eliminate any moisture that can potentially absorb into the board in transit as well as sitting on the assembler’s shelf until they are assembled. In the case of immersion silver final finish, silver saver paper needs to be inserted between each board to keep the silver from oxidizing. ESD handling can also be a potential issue. When the board is manufactured and populated at the same location, however, you minimize the possibility of these and related errors occurring.
Uniformity of Process
Quality control can be greatly affected when separate entities are handling the manufacturing and assembly processes. Also, there is a great disconnect in the communication between the manufacturer and assembler. Some customers choose to be the ones to relay information between the two parties whereas others may simply choose to hand the ball off to the people working for them. The ideal scenario in this situation is a balance between those two scenarios where the input of the customer, manufacturer and assembler is taken into account and valued equally.
Similar to the designer-manufacturer relationship, the most comprehensive solution to this problem is the Total Concept. If manufacturing and assembling are done under the same roof, the space in which errors can occur is marginalized exponentially.
Although it seems like conventional wisdom, it is not always so. Simply put, the less distance there is between two processes, the less room for error.
Sam Sangani is president and CEO of PNC Inc.
Suggested Items
Altus Adds PVA's Game Changing PathMaster X Software to Portfolio
05/16/2024 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, has announced the addition of PVA's new PathMaster X software to its product portfolio. PathMaster X transforms programming for PVA's conformal coating and dispensing systems with an intuitive, game-like controller interface.
Siemens Partners with Microsoft to Deliver AI-enhanced Solutions for Resilient Product Lifecycle Management with Azure
05/14/2024 | PRNewswireSiemens Digital Industries Software announced an expansion of its partnership with Microsoft to make the Siemens Xcelerator as a Service portfolio of industry software available through Microsoft's cloud and AI platform Azure and integrating it with generative AI and Copilot features.
ACDi Expands East Coast Presence with Acquisition of Fourth Manufacturing Plant
05/13/2024 | ACDiACDi, a leading provider of electronics manufacturing services, today announces the expansion of its East Coast presence and manufacturing capabilities with the acquisition of a fourth manufacturing plant in Kilmarnock, Virginia. The company signed an asset purchase agreement with QinetiQ to acquire their Virginia facility and its assets, including SMT, wave soldering, AOI and SPI equipment. The deal brings ACDi to 4 East Coast locations with a total of 9 SMT lines.
Emerald Technologies Acquires Optimum
05/13/2024 | Emerald TechnologiesEmerald Technologies announced its acquisition of Optimum Design Associates, Inc. (Optimum), a leading electronic design and engineering services company. Terms were not disclosed.
Ansys’ Collaboration with Schrödinger will Accelerate Materials Development with Unprecedented Multiscale Simulation
05/09/2024 | ANSYSAnsys and Schrödinger are collaborating to deliver an ICME approach that bridges the gap between materials discovery and product development.