The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
STI Acquires New High-Speed Flexible Mounter from Juki Automation Systems
August 9, 2016 | STI Electronics, Inc.Estimated reading time: 1 minute
STI Electronics, Inc., a full service organization providing training services, training materials, analytical/failure analysis, prototyping, and small-to-medium volume contract PCB assembly, is pleased to announce the acquisition of a new Juki KE-3020VA High-Speed Flexible Mounter.
This new placement system provides STI’s Contract Assembly Services with a significant improvement to its capabilities. With laser centering that also can confirm component release and tombstone picks, it still has an optimum placement rate of 20,900 chips per hour.
The electric feeder not only provides smoother component feeding, it also has double tape feeders that increases the capacity of the machine.
Complementing the new placement system is a new Juki TR6DN in-line matrix tray changer. The TR-6 is equipped with a dual shuttle that brings the components to the head for picking. The big advantage of this system is that no feeder space is lost.
Mark McMeen, Vice President of Engineering Services, remarks: “This is just the latest addition to our continual equipment upgrades. This, coupled with our highly trained and experienced workforce, ensures that we maintain our reputation as the ‘go-to’ contract assembler.”
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume contract PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. For more information, visit www.stielectronicsinc.com.
About Juki Automation Systems, Inc.
Juki Automation Systems (JAS), is an international leader in high-speed SMT Assembly equipment, has shipped more than 30,000 machines worldwide since 1987. Juki has built its global image with a combination of top-quality and high-reliability machines with a reputation for world-class service and support that result in the lowest production costs for its customers. Juki machines have about 30 percent U.S. made content by cost. The pioneer of the modular assembly system in 1993, Juki offers flexible solutions designed for both high-volume and high mix environments. JAS, Inc. employs 45 U.S. employees, including 20 service personnel five specializing in applications sales.
Additionally, JAS, Inc. offers a full line of SMT manufacturing products as wells as selective solder and stamp soldering machines plus Advanced Technology through-hole machines. Juki supports one of the largest field service groups in the industry. For more information, visit www.jukiamericas.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.