NASA Space Robotics Challenge Prepares Robots for the Journey to Mars
August 17, 2016 | NASAEstimated reading time: 2 minutes

NASA, in partnership with Space Center Houston, the Official Visitor Center of NASA Johnson Space Center, and NineSigma, a global innovation consultant organization, has opened registration for a new competition — the Space Robotics Challenge. This event seeks to develop the capabilities of humanoid robots to help astronauts on the journey to Mars.
The Space Robotics Challenge is a $1 million prize competition designed to push the boundaries of robotic dexterity. Teams must program a virtual robot, modeled after NASA’s Robonaut 5 (R5) robot, to complete a series of tasks in a simulation that includes periods of latency to represent communications delay from Earth to Mars.
Though some dexterity has been developed for Earth-based robotics systems using hydraulics, such robots cannot be used in space because of the below-freezing temperatures and the harsh environment of planetary surfaces. The R5 uses elastics technology instead of hydraulics – an innovative way of addressing the problems of operating in space. This technology could also benefit humankind on Earth, as they could operate under dangerous or extreme environments on our home planet.
“Precise and dexterous robotics, able to work with a communications delay, could be used in spaceflight and ground missions to Mars and elsewhere for hazardous and complicated tasks, which will be crucial to support our astronauts,” said Monsi Roman, program manager of NASA’s Centennial Challenges. “NASA and our partners are confident the public will rise to this challenge, and are excited to see what innovative technologies will be produced.”
The competition will be held in a virtual environment. Each team’s R5 will be challenged with resolving the aftermath of a dust storm that has damaged a Martian habitat. This involves three objectives: aligning a communications dish, repairing a solar array, and fixing a habitat leak.
Registration for the Space Robotics Challenge begins today, with a qualifying round running from mid-September to mid-November. Finalists of that round will be announced in December and will engage in open practice from January to early June 2017. The final virtual competition will be held in June 2017, and winners will be announced at the end of June at Space Center Houston.
Software developed through this challenge will be transferable across other robotics systems, allowing the technology produced to be used both with older robotics models, such as the Robonaut 2, and any future models developed.
With the technology generated by this challenge, robots could participate in precursor missions to selected landing sites, arriving long before astronauts to set up habitats, life support systems, communications and solar apparatuses, and even begin preliminary scientific research.
NASA’s Centennial Challenges program is part of the agency’s Space Technology Mission Directorate, and is managed at NASA’s Marshall Space Flight Center in Huntsville, Alabama. STMD uses challenges to gather the best and brightest minds in academia, industry, government and the Nation to drive innovation and enable solutions in important technology focus areas. Innovators from diverse backgrounds, within and outside of the aerospace industry, are invited to be contributors to our Journey to Mars.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.
Indra Signs Agreement with AXISCADES to Boost Production of Cutting-Edge Systems in India
06/18/2025 | PRNewswireParis Air Show -- Indra and the Indian technology company AXISCADES have signed an agreement to collaborate on the production of solutions for the aerospace and defense markets.
GKN Aerospace Delivers First High Voltage EWIS System for Clean Aviation’s SWITCH Project
06/16/2025 | GKN AerospaceGKN Aerospace has completed and delivered the first high voltage Electrical Wiring Interconnection System (EWIS) for the Clean Aviation SWITCH project.