-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Sensible Design: When Coatings Go Wrong
August 23, 2016 | Phil Kinner, ElectrolubeEstimated reading time: 2 minutes
This month, I consider some of the more common, and often very frustrating, problems that may be encountered when coating electronic circuit boards and components. I also discuss some practical solutions.
As we all know, nothing in life is straightforward. In any engineering discipline, if there is the slightest chance that something might go wrong, you can bet your bottom dollar that it will. The secret is to be prepared for it. For the purposes of this column, I’m going to concentrate on the use of conformal coatings for the protection of electronic assemblies, highlighting some of the potential pitfalls associated with the choice of coating and the method of application. In each case, I will suggest an approach that should mitigate the majority of problems you are likely to encounter.
Problem: The quality and performance of a conformal coating material could be compromised according to the method of application.
This issue is commonly encountered when a product is transferred from one circuit manufacturer to another; for example, a product may be dip-coated in one country but selectively coated in another, with the specification requiring that the same material be used at both sites. The problem that arises here, however, is that using a material formulated for dip-coating in selective coating equipment can result in poor yield due to excessively fast drying and bubble entrapment.
One of my customers spent six months trying to solve a bubble issue internally, without realising that the root cause of this problem lay in the material formulation. After working with the customer, we found that by changing the solvent blend, the bubble entrapment issue could easily be resolved. Moreover, this solution simplified the process and reduced the cycle time. And since the non-volatile formulation remained the same, there was no need to re-qualify.
Problem: Achieving incorrect coating thickness, especially with acrylics.
The IPC specification allows a dry film thickness of between 30 and 130 microns, with the greater thickness being achieved by the application of multiple coating layers. Trying to achieve a 130-micron dry film thickness from a single selective-coating process with a solvent-based acrylic material is a recipe for a disaster, likely to result in excessive bubble formation, film shrinkage, coating delamination and additional stress on components. The result is poorer protection, rather than an improved overall level of circuit protection. Aiming for a uniform 30-50 microns and focusing on achieving perfect coverage at each application is a much better approach to improving the protection of electronic circuits.
Achieving the correct coating thickness is important; bear in mind that if the coating is too thick it can lead to entrapment of solvents in areas where the coating does not fully cure. Similarly, it can cause the coating to crack as it cures or as the result of changes in temperature, or due to mechanical shock and vibration.
To read this entire article, which appeared in the July 2016 issue of The PCB Design Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/17/2024 | Andy Shaughnessy, Design007 MagazineThis week, trade shows are at the top of our feed, with our coverage of the Del Mar Electronics and Manufacturing Show and IPC APEX EXPO. These two longtime events are almost polar opposites in size and scope, but Del Mar seems to be expanding from its roots as a “neighborhood gathering” with its move into the Del Mar Fairgrounds. The Del Mar show always has a good “buzz factor,” which is something you can’t buy.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
IPC Raymond E. Pritchard Hall of Fame Award: Pierre-Jean Albrieux
05/10/2024 | Marcy LaRont, PCB007 MagazineCongratulations to Pierre-Jean Albrieux, who received the 2024 IPC Raymond E. Pritchard Hall of Fame Award. The award is given to individuals in recognition of the highest level of achievement, extraordinary contributions, and distinguished service to IPC and toward the advancement of the industry, including helping to create a spirit of mutual esteem, respect, and recognition among members consistent with the goals and mission of IPC.
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
Real Time with… IPC APEX EXPO 2024: Industry Growth, Challenges, and Technological Advancements
05/09/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Shawn DuBravac, IPC chief economist, dive into key industry topics such as growth, challenges, and technological advancements. They discuss shifts in the global competitive landscape, downstream demand, customization, and how AI is enhancing human skills. The industry outlook appears promising for both the short and long term.