Global Citizenship: Together for a Perfect PCB Solution
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
Nolan’s Notes: Everyone Has Their Eye on India
Happy’s Essential Skills: Computer-Aided-Manufacturing, Part 1—Automation Protocols
September 14, 2016 | Happy HoldenEstimated reading time: 19 minutes
I have addressed automation planning previously in this series, so I hope by now you realize the difference between ‘automation’ and ‘mechanization.’ In printed circuit fabrication and assembly, most of what is advertised is mechanization. But when you get to assembly test, then you begin to see true automated solutions. The difference between the two is the networking and protocols that supply the information and data. An industry for us to look to as an example: our brothers in semiconductor fabrication. This industry has had fully automated factories since the mid-1980s.
INTRODUCTION
This column is dedicated to the automation protocols that currently exist and some new ones just coming on the market. In Part 2, I will present some examples from my own projects.
The ‘messages and recipe data’ needed for production scheduling-to-machine connections has evolved over the years. The selections to be covered here are:
- Serial RS-232C/RS-485
- Parallel IEEE-488/HP-IB
- MAPS™ protocol
- SECS I & SECII/GEM protocols
- OML
- IPC-2541
- LAN (IEEE-802.3 and TCP/IP)
- Wireless and IoT
Recipe-to-Machine and Machine-to-Machine
When I started working with automation control in 1970, we had ASCII characters in parallel cabling. So we started by using these printer and teletype protocols to control machines. Sometimes, we had only BCD to work with! Today you have the ‘lights-out-factory’ and Industry 4.0 initiatives. A lot of progress is the result of the automotive industry’s application of PLCs and robots to manufacturing. Figure 1 shows what the Germans foresee for Industry 4.0[1]. Figure 2 shows the 4-level hierarchy of CAM, while Figure 3 shows typical networked factory control units.
Figure 1: The scope of Industry 4.0 enables an intelligent plant (planet). (Source: Advantech)
Figure 2: Enterprise and plant control topology showing the 4-level hierarchy. (Source: Renesas Edge—Big Data in Manufacturing)
I was fortunate to be employed by Hewlett-Packard. Their 2116-model computers (and later, the 2110) were real-time-interrupt driven computers and ideal for machine control. HP had even developed a CNC machine control system but decided not to sell it since it did not fit their instrument or computer sales force’s experience. They sold all the CNC systems to Allen Bradley in Milwaukee, Wisconsin. Thus, I ended up working frequently with AB to buy back the software that HP had developed. This was serendipitous as AB introduced me to their programmable logic controller (PLC) technology. PLCs became a major tool in machine control.
Figure 3: Typical industrial automation controllers and PLCs. (Source: Wenatchee Valley College, Nevada)
Page 1 of 5
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Dan Feinberg on Walt Custer: Remembering an Extraordinary Business Associate and Friend
09/09/2025 | Dan Feinberg, Technology Editor, I-Connect007The passing of Walt Custer marks the end of an era for all those who knew him and were helped and impressed by his presence, both personally and professionally. Walt's life was characterized by his unwavering commitment to the industry, his profound wisdom and willingness to share it, and his infectious enthusiasm for everything he did.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/05/2025 | Andy Shaughnessy, I-Connect007It’s almost fall here in Atlanta, and that means that the temperature is finally dropping. And it quit raining! It’s been raining since March, and I’m so over it, as the social influencers say. Last night we grilled out on the deck, and it wasn’t hot, and we didn’t get rained on. Life is good. It was a busy week in the industry. In this installment of my must-reads, we say goodbye to Walt Custer, the man who made PCB data points interesting for the rest of us.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.