-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSoldering Technologies
Soldering is the heartbeat of assembly, and new developments are taking place to match the rest of the innovation in electronics. There are tried-and-true technologies for soldering. But new challenges in packaging, materials, and sustainability may be putting this key step in flux.
The Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Counterfeit Electronic Components Identification: A Case Study
July 26, 2017 | Martin Goetz and Ramesh Varma, Northrop Grumman Corp.Estimated reading time: 6 minutes
Abstract
Counterfeit electronic components are finding their way into today's defense electronics. The problem gets even more complex when procuring DMS (diminishing manufacturing source) parts. This paper will provide a brief introduction to counterfeit prevention and detection standards, particularly as they relate to the aerospace and defense sector. An analysis of industry information on the types and nature of counterfeit components will be discussed to illustrate those most likely to be counterfeited, followed by a specific case at a major defense contractor.
The case involved two circuit card assemblies failing at test, whereby their root cause for failure was identified as "unable to write specific addresses at system speeds." The error was traced to a 4MB SRAM received from an approved supplier. Fifteen other suspect parts were compared with one authentic part directly purchased from a supplier approved by the part manufacturer. Defects or anomalies were identified but not enough to unequivocally reject these parts as counterfeit as the defects could have also happened in the pre-tinning process, which is a program-specific requirement if the parts were stored for more than three years. Through the subsequent analysis, subtle differences between the authentic and suspect parts were identified and isolated. The methodologies and process chosen to identify counterfeit parts will be reviewed and an assessment of the results will be presented along with the defects found in relation to the defect types reported in relevant test standards.
Introduction
The Defense Federal Acquisition Regulations DFARS 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System defines a counterfeit part as:
An unlawful or unauthorized reproduction, substitution, or alteration that has been knowingly mismarked, misidentified, or otherwise misrepresented to be an authentic, unmodified electronic part from the original manufacturer, or a source with the express written authority of the original manufacturer or current design activity, including an authorized aftermarket manufacturer. Unlawful or unauthorized substitution includes used electronic parts represented as new, or the false identification of grade, serial number, lot number, date code, or performance characteristics.
Highlights for the DFARS Case 2012-D055 final rule include:
• Applying requirements to the acquisition of electronic parts and assemblies containing electronic parts, including commercial items (COTS)
• Defining “Counterfeit” and “Suspect counterfeit”, is limited to electronics, including embedded software and firmware
• The costs of counterfeit electronic parts or suspect counterfeit electronic parts and the cost of rework or corrective action that may be required to remedy the use of inclusion of such parts are unallowable (unless electronic parts were provided as GFE and timely notice of discovery was provided by contractor)
Based on the highlights for the ruling and the impact that counterfeit parts could have on the performance of fielded systems, it should be obvious in terms of the importance of understanding, identifying and addressing suspect counterfeit parts in the aerospace and defense industry. Although the current definition and ruling applies to electronics, the expectation is the definition will eventually broaden to include nonelectronics (i.e. optics, mechanics, MEMs, and materials). Therefore, a robust process to ensure parts that are received and used in systems to support the aerospace and defense industry is paramount to not only the business and industry, but to the users of the products that rely on these systems, especially the warfighter.
Counterfeit Parts Business is a Multibillion Dollar Industry
The discussion of recognizing that counterfeit parts have been introduced into the supply chain is not new, with various companies, and technical journals publishing as early in 2002.
In a 2006 article published by Pecht and Tiku and noted in the UK Electronics Alliance (UKEA) position paper, “UKEA Position on Counterfeit Electronic Components”:
Alliance for Grey Market and Counterfeit Abatement (AGMA), based in the USA, estimates that, in 2006, up to 10% of technology products sold worldwide are counterfeit, which amounts to $100 billion of sales revenues. However, this does not take into account consequential losses. In 2007, the US Patent and Trademark Office estimated that total ‘counterfeiting and piracy (activity) drains about $250 billion out of the US economy each year and 75,000 jobs’.
A primary driver of counterfeit parts has been part scarcity, or diminishing manufacturing source and material supply (DMSMS). Realizing that as the consumer market began to grow exponentially in the 1980s and 1990s, the supply base for manufacturing parts rated for military and high-reliability applications was having a difficult time keeping up with demand, and part availability was becoming more difficult. These market forces drove the opportunity to introduce counterfeit parts into the supply chain through ‘gray market electronics brokers’. According to a 2001 article on fake parts, “One U.S. independent distributor, which asked to remain anonymous, said it paid a broker in China $70,000 for 1206 case-size ceramic capacitors about three months ago. The 90-cent parts, which under less-constrained market conditions would have cost 20 cents, slipped through two quality inspections before arriving on the OEM's production floor".
Bad Parts are not Always Counterfeit
It is important to recognize that, just because there are anomalies identified on electronic parts, it does not signify that the parts are counterfeit. It does, however, require the incoming inspection organization to assume the responsibility to make initial determination as to whether there is enough evidence to suggest the parts from a lot or shipment should be evaluated for additional anomalies. Three important points to consider when creating a system to screen for counterfeit parts are:
• They are not easy to identify, even with sophisticated analytical methods
• They are in the supply chain, even with authorized distributors
• They are more of an issue with obsolete parts
Page 1 of 2
Suggested Items
Case Study: PCB Design Flaws Affect Product Cost
12/03/2024 | Matt Stevenson, ASC SunstoneIn the rapidly evolving aerospace industry, precision and reliability are paramount. “AeroTech Solutions” (not the company’s real name), an aerospace company specializing in satellite technology, recently faced a significant challenge that tested its operational integrity: A flaw identified in the PCB design of its latest satellite model led to unexpected delays and cost overruns.
VORAGO Technologies, Collabora Partner to Advance Open Source in Space
11/25/2024 | GlobeNewswireVORAGO Technologies, a leading provider of radiation hardened and radiation tolerant MCUs and MPUs for Aerospace and Defense, and Collabora, a leader in open source software and support, announced they are partnering to advance the use of open source to achieve resilience for mission critical applications in space.
Aeluma Secures NASA Contract to Advance Quantum Dot Photonic Integrated Circuits for Aerospace and AI Applications
11/25/2024 | ACCESSWIREAeluma, Inc., a semiconductor company specializing in high-performance, scalable technologies for mobile, automotive, AI, defense and aerospace, communication and quantum computing, announced it has been awarded a contract by NASA to develop quantum dot photonic integrated circuits (PICs) on silicon.
AirBorn Announces Agreement to be Acquired by Molex
11/18/2024 | PRNewswireAirBorn, a global manufacturer of high reliability electronics and components, announced it has entered into an agreement to be acquired by Molex, a leading global connectivity and electronics solutions provider.
RTX's Collins Aerospace to Provide UK Chinook Helicopters with Interoperable Avionics System
11/12/2024 | RTXCollins Aerospace, an RTX business, has received a $19 million contract from the Department of Defense to equip a fleet of new H-47 Chinooks for the UK Royal Air Force with its Common Avionics Architecture System (CAAS) avionics management suite.