New Cadence Allegro DesignTrue DFM Technology Accelerates New Product Development and Introduction Process
September 13, 2017 | Cadence Design Systems, Inc.Estimated reading time: 3 minutes
Cadence Design Systems, Inc. today announced Cadence Allegro DesignTrue DFM technology, the industry’s first solution to perform real-time, in-design design-for-manufacturing (DFM) checks integrated with electrical, physical and spacing design rule checks (DRCs). The innovative new technology, integrated into the Allegro PCB Editor, enables PCB designers to identify and correct errors immediately, long before manufacturing signoff. By finding errors earlier, design teams reduce rework, shorten design cycles and accelerate the new product development and introduction process, potentially saving at least one day per iteration and days to weeks overall.
Unlike manufacturing signoff tools that are run in batch mode when performing DFM checks, Allegro DesignTrue DFM technology provides continuous in-design feedback while designing, eliminating the frustrating and time-consuming design-verify-fix iterations between PCB designers and DFM checking teams. By the time PCB designers reach final DFM signoff, they already know their design meets manufacturing rules, resulting in a smoother signoff and handoff to the manufacturing partner and a shorter, more predictable design cycle.
Allegro DesignTrue DFM technology is consistent with the proven Allegro constraint-driven design flow and online checking solution currently used for electrical, physical and spacing rules. Allegro DesignTrue technology provides a wide set of checks to ensure design manufacturability. Spacing between copper features such as traces, pins, vias relative to the board outline and other copper features can be verified in real time, independent of electrical and net-based rules.
The new technology makes it easy to configure, apply contextually and reuse manufacturing rules. Allegro DesignTrue DFM technology supports the import and export of DFM rules and addresses more than 2,000 advanced checks. In addition, it employs a new and more user-friendly DRC browser capable of addressing one class of errors at a time. Constraints are highly configurable with the ability to enable and disable groups and whole categories of rules, or individual rules. Rules can be applied in etch mode, non-etch mode, and in stack-up mode, giving designers the ability to isolate layers, geometries and cutouts. The new browser also features an integrated DRC description with graphics, characterizes DRCs by type and provides a DRC count chart. Users can quickly sort, browse and review, as well as waive and unwaive DRCs.
“Increasing PCB complexity is extending our design cycles and making them unpredictable,” said Greg Bodi, director of System Engineering PCB Layout at NVIDIA. “With Allegro DesignTrue DFM technology, our PCB design teams can be sure that they are designing the board correctly the first time, taking into account electrical, physical and manufacturing constraints. This eliminates unnecessary iterations with manufacturing signoff processes and saves us days to weeks of time.”
“Accelerating new product development and introduction is a key priority for our customers,” said Tom Beckley, senior vice president and general manager, Custom IC & PCB Group. “For more than 15 years, our customers have relied on the Allegro constraint-driven flow and online checking solution for the electrical and physical domains. As part of our System Design Enablement strategy, we’re now applying this same approach to DFM checks. Extending our solution to the manufacturing domain enables electronics OEMs to bring their products to market more quickly and with greater confidence.”
About Cadence
Cadence enables electronic systems and semiconductor companies to create the innovative end products that are transforming the way people live, work and play. Cadence software, hardware and semiconductor IP are used by customers to deliver products to market faster. The company’s System Design Enablement strategy helps customers develop differentiated products—from chips to boards to systems—in mobile, consumer, cloud datacenter, automotive, aerospace, IoT, industrial and other market segments. Cadence is listed as one of Fortune Magazine’s 100 Best Companies to Work For. For more information, click here.
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Beyond Prepreg: The Glassless ‘Revolution’
06/25/2024 | Marcy LaRont, PCB007 MagazineAs our industry rallies around the call to action for HDI and UHDI, we find unparalleled and myriad laminate options. This abundance is rivaled only by the question surrounding them: Can they measure up to the high technology packaging demands required in our near future? Unsurprisingly, recent developments in FR-4-esque materials for high-speed and high-density designs, as well as newer, glassless technology for replacing traditional glass-impregnated laminates and prepreg, are garnering much interest. I caught up with Alun Morgan, technology ambassador for Ventec International Group, to ask about the impending “glassless revolution” and how it’s poised to solve some of our manufacturing challenges.
Connect the Dots: Designing for Reality—Lamination and Materials
06/19/2024 | Matt Stevenson -- Column: Connect the DotsAs many of you have likely figured out, I am quite passionate about the subject of designing PCBs for the reality of manufacturing. I wrote a book about it and I participate in an I-Connect007 On the Line with… podcast series dedicated to the subject. This companion article will focus on multilayer lamination, keeping the bigger picture in mind: Realistic PCB designs should prioritize manufacturability and reliability of the PCB as well as meet the other design requirements. So, one must account for the production variables associated with individual manufacturing partners.
Day 2: A Full Day at the EIPC Summer Conference
06/19/2024 | Pete Starkey, I-Connect007Editor's note: This is the third and final report from the EIPC Summer Conference. It was a bright and early start to the second day of the 2024 EIPC Summer Conference at the European Space Centre, Noordwijk, The Netherlands, June 4-5. A short journey by bus from the hotel in Leiden and our security passes from the day before got us through the gate and to our seats in the Newton Room for Session 4, “Material Studies,” moderated by Martyn Gaudion.
Looking Into Space: EIPC Summer Conference, Part 2
06/17/2024 | Pete Starkey, I-Connect007“Innovative Development of PCB Technology and Design” was the theme of the second session of the 2024 EIPC Summer Conference, June 4-5, at the European Space Centre, Noordwijk, The Netherlands.