Airbus Wins ESA Contract to Construct Third European Service Module for NASA’s Orion Spacecraft
May 26, 2020 | AirbusEstimated reading time: 2 minutes
The European Space Agency (ESA) has signed a contract with Airbus for the construction of the third European Service Module (ESM) for Orion, the American crewed spacecraft. The contract is worth around €250 million.
By ordering this additional service module, ESA ensures the necessary continuity in NASA’s Artemis programme. The third European Service Module (Artemis III Mission) will be used to fly astronauts to Earth’s neighbour in space in 2024 – the first to land on the Moon since Apollo 17 following a hiatus of more than 50 years.
“Our know-how and expertise will enable us to continue to facilitate future Moon missions through international partnerships,” said Andreas Hammer, Head of Space Exploration at Airbus. “By working together with our customers ESA and NASA as well as our industrial partner Lockheed Martin, we now have a reliable planning basis for the first three lunar missions. This contract is an endorsement of the joint approach combining the best of European and American space technologies.”
David Parker, ESA Director of Human and Robotic Exploration, said: “By entering into this agreement, we are again demonstrating that Europe is a strong and reliable partner in Artemis. The European Service Module represents a crucial contribution to this, allowing scientific research, development of key technologies and international cooperation – inspiring missions that expand humankind’s presence beyond Low Earth Orbit.”
The first non-crewed Orion test flight with a European Service Module (Artemis I) will fly in 2021. It is as part of the following mission, Artemis II, that the first astronauts will then fly around the Moon and back to Earth.
The ESM will provide propulsion, power, air and water for the astronauts, as well as thermal control of NASA’s new spacecraft.
More than 20,000 parts and components are used in each ESM, from electrical equipment to engines, solar panels, fuel tanks and life support supplies for the astronauts, as well as approximately 12 kilometres of cables. The first service module was delivered to NASA in November 2018 and has already been mated with the Crew Module. The fully integrated spacecraft already finished the thermal-vacuum testing at NASA’s facility in Ohio, USA, and returned to the Kennedy Space Center in Florida, USA, while the second service module is now being integrated and tested by Airbus in Bremen, with delivery set for the first half of 2021.
During the development and construction of the ESM, Airbus has drawn on its experience as prime contractor for ESA’s Automated Transfer Vehicle (ATV), which provided the crew on board the International Space Station with regular deliveries of test equipment, spare parts, food, air, water and fuel.
The ESM is cylindrical in shape and about four metres in diameter and height. It has four solar arrays (19 metres across when unfurled) that generate enough energy to power two households. The service module’s 8.6 tonnes of fuel can power one main engine and 32 smaller thrusters. The ESM weighs a total of just over 13 tonnes. In addition to its function as the main propulsion system for the Orion spacecraft, the ESM will be responsible for orbital manoeuvring and position control. It also provides the crew with the central elements of life support such as water and oxygen, and regulates thermal control while docked to the crew module.
Suggested Items
The Government Circuit: How IPC Drove Industry Progress Through Public Policy Advocacy in 2024
01/07/2025 | Chris Mitchell -- Column: The Government CircuitIn 2024, IPC Government Relations continued to shift the narrative about electronics manufacturing in the halls of government, overcoming decades of policymaker indifference in Washington and Brussels. In Asia, where several governments have taken significant strides to foster their domestic electronics ecosystems, IPC broadened its government relations efforts.
EIPC Winter Conference to Explore Latest Trends in Electronics Manufacturing
12/31/2024 | EIPCThe European Printed Circuit Association (EIPC) is pleased to announce its upcoming Winter Conference, scheduled for February 4-5, 2025, at the DoubleTree by Hilton Hotel in Luxembourg City.
ViTrox Welcomes Gemaddis as a New Sales Channel Partner in France
12/20/2024 | ViTroxViTrox Technologies, which aims to be the World’s Most Trusted Technology Company in delivering innovative, advanced, and cost-effective automated Machine Vision Inspection Solutions for the semiconductor and electronics manufacturing industries, is honoured to announce its partnership with Gemaddis as its new Sales Channel Partner (SCP) for the French market, effective May 2024.
ViTrox Welcomes Gemaddis as a New Sales Channel Partner in France
12/18/2024 | ViTroxViTrox Technologies, which aims to be the World’s Most Trusted Technology Company in delivering innovative, advanced, and cost-effective automated Machine Vision Inspection Solutions for the semiconductor and electronics manufacturing industries, is honoured to announce its partnership with Gemaddis as its new Sales Channel Partner (SCP) for the French market, effective May 2024.
PCB Fabricator Cistelaier Receives ESA Qualification
12/16/2024 | CistelaierThe capability and independence of its space industry are strategic for Europe, and the European Space Community needs a qualified, resilient supply chain with adequate production capacity. Specifically, it requires greater production capacity in PCB manufacturing. On this premise, in early 2020, Cistelaier began the process of obtaining an ESA qualification.