Flex on the Brain: The Future of Neural Interfaces
October 26, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/6716/9086/3636/Jonathan_Viventi.jpg)
The SMTA Additive Electronics TechXchange took place virtually on October 14, with presentations from a wide variety of technologists involved in additive processes. Organizers Tara Dunn of Omni PCB and Lenora Clark of ESI Automotive did a great job putting together this event.
One of the highlights was a presentation titled “Flexible Electronics for Neural Interfaces” by Dr. Jonathan Viventi, assistant professor of biomedical engineering at Duke University. His research with flexible electronics has helped create new types of technology for interfacing directly with the human brain, allowing high-resolution scans over wide areas. This technology can diagnose and treat all kinds of neurological disorders, including epilepsy.
In a fascinating presentation, Viventi explained that earlier brain sensors were impractical, often using thousands of electrodes, and they offered only two options: a high-resolution scan of a small part of the brain or a low-resolution shot of a broad area.
Now, Viventi’s new flexible silicon interface fits directly onto the brain and can provide a high-res look at a wide area. He noted that silicon could behave just like a flexible circuit if you make it thin enough. In his research at Duke, Viventi has investigated the use of LCP and polyimide, both of which use additive processes, and they’re fairly inexpensive as well.
His interface has been tested and found to be safe on rats and monkeys. Now, humans having brain surgery can volunteer to have one placed on their brain and removed when surgery is completed. Viventi explained that placing the flexible silicon on the brain isn’t too dangerous.
“The brain is actually pretty tough,” Viventi said. Doctors induce a seizure with drugs, and they’re able to detect waves propagating through the brain that they were missing before. Previous tools just didn’t have high enough resolution.
Interestingly, the human subject stays awake during the brain scan. Viventi said the doctors ask patients to answer questions during the procedure. I don’t know if I’d like that part, but I see the point. Viventi said plans are underway to scale up to commercial CMOS silicon; each of these interfaces would replace 65,000 electrodes.
LCP interfaces are especially robust, with accelerated aging showed that they would last more than five years at 37°C, and they offer great biocompatibility. Viventi’s research is a great reminder of how technology is being used to save lives and treat neurological disorders every day.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
07/26/2024 | Nolan Johnson, I-Connect007This week, I’ve been attending Thailand Electronic Circuits Asia 2024. This is the inaugural event, hosted by Thailand Printed Circuit Association (THPCA) in collaboration with the Hong Kong Printed Circuit Association (HKPCA). Thailand has supported a PCB industry for some time—mostly automotive applications—but the China Plus One dynamic has definitely taken root here.
Hirose Electric Adds Master Electronics as Authorized Distributor
07/25/2024 | HiroseHirose, a leader in the design and manufacturing of innovative connector solutions, has strategically expanded its Americas distribution network to better support its growing customer base. Master Electronics will support the full Hirose line of connector solutions across the Americas.
MKS’ Atotech and ESI Participate in Electronics Circuit Asia in Thailand
07/25/2024 | AtotechMKS Instruments announces its participation at the Electronics Circuit Asia 2024 in Thailand, July 24-26, highlighting its leading brands Atotech® and ESI® and related advances in advanced packaging, package substrate, and printed circuit board manufacturing.
Strip Etch Strip: Episode 9 of On the Line With... Designing for Reality Podcast Now Available
07/25/2024 | I-Connect007Don't miss the latest episode of "On the Line With... Designing for Reality," where we walk through the PCB manufacturing process. At this stage, we have a panel made up of all the internal layers laminated together, through-holes drilled, and the outer layer copper features covered with a protective layer of tin.
Enhance Your Electronics Expertise Through IPC Courses in August
07/25/2024 | Corey Lynn, IPCAs the global leader in standards, training, and certification for the electronics industry, IPC is pleased to announce an array of upcoming online instructor-led courses this August. These courses are designed to equip professionals with the latest skills and knowledge required to excel in the ever-evolving field of electronics manufacturing and design. Whether you want to deepen your expertise in PCB design and manufacturing, understand the intricacies of intermetallic compounds, or learn about counterfeit part mitigation, IPC has a course tailored for you.