-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Avishtech Introduces Latest Generation of Its Revolutionary Gauss Stack PCB Stack-up Tool
March 1, 2021 | Avishtech, Inc.Estimated reading time: 5 minutes
![](https://iconnect007.com/application/files/7816/3132/9804/new-icon.jpg)
Avishtech, the leading provider of innovative EDA stack-up and 2D field solver solutions, has announced the availability of the latest version of its Gauss Stack PCB stack-up design and simulation solution. This version includes an extensive dielectric materials library that enables rapid specification and implementation of a complete stackup design that includes both electromagnetic and thermomechanical simulations, fully integrated, with no additional user input of material data required. Gauss Stack accurately predicts resin starvation and glass stop issues and provides board level thermomechanical properties including coefficients of thermal expansion in all directions—X, Y and Z axis (both above and below Tg).
Keshav Amla, Founder and CEO of Avishtech, notes, “Today’s high data rate products including 112 Gbps/channel and 5G/mmWave applications have very little ‘wiggle room.’ A slight mistake in one area can quickly render a design inoperable or unmanufacturable. Prior to this point in time, there was no EDA product that enabled a real Multiphysics approach, where product developers can carry out electromagnetic and thermomechanical simulations, manufacturability checks and reliability predictions. The process consisted of ‘best guess’ estimations that had to be verified through the building of a test vehicle board. And, if there were problems detected at the test-board level, the only solution was to go back to square one and start the process all over again. This led to time-intensive and expensive rework that could then impact critical time-to-market windows, competitive advantages and overall profitability of a product line.”
“What we have done with Gauss Stack is to effectively bridge the gap between the design and manufacturing processes,” continues Amla. “Now, instead of just applying ‘best practices’ and hoping that the PCB you design will sync up with the characteristics of the dielectric material you have selected, with Gauss Stack, you can move forward with a right-the-first-time design that meets your performance characteristics but is also manufacturable, reliable and profitable.”
The specific features of Gauss Stack include: the ability to accurately model insertion loss by accounting for ground plane losses; the accurate prediction of resin starvation and glass stops that includes the effect of dielectric filler and conductor roughness; the ability to accurately simulate the PCB thermomechanical properties that are critical for reliability predictions; the further simulation, based on these board level thermomechanical properties, of plated though-hole reliability, microvia reliability and solder joint reliability; the ability to perform simulations for the impedance and frequency and roughness dependent losses associated with dielectric materials, for the full stackup with one click; and the additional ability to perform synthesis to simulate line widths required to achieve a target impedance, again for the full stackup with one click.
Amla continues, “At the higher level, Gauss Stack enables you to predict failure modes at the stackup design stage. Prior to now, product designers weren’t able to predict how resin content, glass weave, retained copper %, and other aspects of their designs would impact the board level properties or the manufacturability and reliability of their boards. And, with today’s high-frequency, high-date rate designs, these are often the hidden ‘gotchas’ that determine whether your product will work as designed or even if the product can be successfully manufactured. Gone are the days when designing for just one attribute was sufficient.”
While numerous EDA toolsets contain massive amounts of information in the form of libraries, the ability to quantify and qualify that data in a meaningful way is not always possible. Amla explains, “But, we haven’t just built another iteration of the same mouse trap—a broad-based laminate database. Instead, we have incorporated into Gauss Stack a level of intelligence in the form of a proprietary algorithm that is able to extract detailed mechanical properties at the polymer level that are critical for the afore-mentioned thermomechanical simulations that Gauss Stack conducts. Based on these simulations it’s possible to determine how these properties will impact the design, manufacturability, long-term operability and reliability of the end product. We have done extensive validation of our predictions on several built test vehicle boards and all of our results have been within experimental error.”
Lee Ritchey, Founder and President of Speeding Edge who is widely regarded as one of the leading industry experts in PCB design, states, “Extensive and meaningful innovation in EDA toolsets is a rarity in this industry. Toolset developers might offer tweaks of their products here and there that are of some value but it’s rare that a new toolset comes on the scene that can be a real game changer. Avishtech’s Gauss Stack is such a tool. It provides insight into those material characteristics and performance metrics that can make or break a design in terms of their predictability and reliability once the product is manufactured.”
Marc Licciardi, Founder of DfX Engineering, is an early adopter of Avishtech’s Gauss Stack. He notes, “What Avishtech has built with Gauss Stack is not just an incremental change, but, rather, a fundamental shift in how I can design PCB stacks. It allows me to catch manufacturability issues like resin starvation and glass lock/glass stop, which can also cause CAF and other related issues, as well as predict the reliability of the solder joints and vias, on top of impedance and loss modeling, all at the design stage, rather than learning of these issues many months into the development process. Gauss Stack empowers me to virtually prototype several different stackups to compare them in terms of manufacturability, reliability, and signal integrity and help identify which stackup fits the right balance of requirements to take products to market faster, without having to build test vehicle after test vehicle.”
Product Availability and Delivery
Gauss Stack is available now. Instead of the traditional pricing methodologies of a toolset license per seat, Avishtech utilizes a subscription-based customer fulfillment model. Each year, an Avishtech customer buys an annual subscription, based on their design needs criteria, and all the enhancements, additions and technology advancements made to the product during that subscription period are included in the subscription price. System software requirements include: OS Microsoft Windows 10 (64 bit); Recommended CPU—64-bit Intel i7 Quad Core processor running at 4.0 GHz or better (Requirement: 64-bit Intel Dual core processor running at 3.0 GHz); Recommended memory—16 GB or higher (Requirement 8 GB or higher).
Suggested Items
Eutect Overcomes Panel Soldering Challenges with New Gripper
09/06/2024 | Eutect GmbHThe selective soldering of assemblies in panels is not a real challenge. However, if you need to solder relatively large panels with towering components, specialists like those at Eutect GmbH have to step up to the plate.
AIM Solder Appoints Kevin Kwan as Business Development Manager in Asia
09/06/2024 | AIM SolderAIM Solder, a global leader in solder assembly materials for the electronics industry, is thrilled to announce the appointment of Kevin Kwan as Business Development Manager for the Asian market.
Solder Printing: A 1:1 Ratio of Technical and Creative
09/03/2024 | Nolan Johnson -- Column: Nolan's NotesWhen things get technical, I’m in my happy place. It’s why I work in technology in the first place. I also happen to enjoy creative pursuits, and my real happy place is when both happen at the same time. Over the years, it seems that most of us engaged in printed circuit design and manufacturing are similarly wired. I don’t think I’m alone in stating that finding a creative solution to a technical problem is one of the highlights of our workday. We get bonus points if the solution is particularly simple or uncomplicated.
AIM to Present on Ultra-Miniature Assembly for Mini/MicroLEDs at MicroLED Connect
09/03/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming MicroLED Connect Conference and Exhibition taking place September 25-26 in the Conference Center at High Tech Campus Eindhoven in The Netherlands.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.