-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueSales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
VARIOPRINT Converts to Peters Solder Resist
May 4, 2021 | Lackwerke Peters GmbH & Co. KGEstimated reading time: 2 minutes

Leading PCB manufacturers such as VARIOPRINT are concerned with the risk of the PCB being damaged during soldering in assembly production owing to the higher temperature load. By choosing the solder resist system from Peters, the Swiss company located in the canton of Appenzell Ausserrhoden south of Lake Constance, can meet the requirements for production processes and materials. Particularly with regard to the base material, VARIOPRINT is able to provide, thanks to the Peters expertise, higher Tg values and a better dimensional stability of the PCBs. "Our process engineers defined very stringent specifications for the manufacturers, in view of guaranteeing the highest possible product quality to our customers in the future," says VARIOPRINT sales engineer Sascha Faust
VARIOPRINT is convinced that the new ink from Peters does not only feature a better environmental compatibility, but also a higher grain-fineness of pigments and fillers and a higher performance in exposure. The VARIOPRINT research team has established that the ELPEPCB® Elpemer® AS 2467 system made in Kempen ensures a better structuring of the ink on the PCB, especially in ultra-fine conductor applications. In addition, this creates a more homogeneous surface structure. Combined with modern production processes, the printed circuit board from VARIOPRINT coated with Peters ink is setting standards. Sascha Faust: "This is the only way to ensure that our PCBs will be of highest possible quality for the next PCB generation and the one after that."
"The fact that VARIOPRINT, a globally recognised PCB producer, has opted for our solder resist is proof of confidence for us, and an incentive to offer ourselves to other manufacturers," says Daniel Langenstein, managing director of Peters Schweiz GmbH, referring to other companies of the industry that have recently switched over to this or similar Peters products for the reason of their quality advantage and the eco seal. This is because the eco-friendly products from the Lower Rhine do not contain the problematic photoinitiators type 907 or 369 that the authorities have classified as a hazard to health and environment.
Suggested Items
Silicon Mountain Contract Services Enhances SMT Capabilities with New HELLER Reflow Oven
07/17/2025 | Silicon Mountain Contract ServicesSilicon Mountain Contract Services, a leading provider of custom electronics manufacturing solutions, is proud to announce a significant upgrade to its SMT production capability with the addition of a HELLER 2043 MK5 10‑zone reflow oven to its Nampa facility.
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.