New Technology Will Allow Important Metals to be Made More Efficiently
August 10, 2021 | University of Minnesota College of Science and EngineeringEstimated reading time: 2 minutes
University of Minnesota Twin Cities College of Science and Engineering researchers have invented a cheaper, safer, and simpler technology that will allow a “stubborn” group of metals and metal oxides to be made into thin films used in many electronics, computer components, and other applications.
The research is published in the Proceedings of the National Academy of Sciences of the United States of America (PNAS), a peer-reviewed, multidisciplinary, high-impact scientific journal.
The researchers worked with the University of Minnesota’s Technology Commercialization Office to patent the technology and have already garnered interest from industry.
Many metals and their compounds must be made into thin films before they can be used in technological products like electronics, displays, fuel cells, or catalytic applications. “Stubborn” metals, however—which include elements like platinum, iridium, ruthenium, and tungsten, among others—are very difficult to convert into thin films because they require extremely high temperatures (usually more than 2,000 degrees Celsius) to evaporate.
Typically, scientists synthesize these metal films using techniques like sputtering and electron beam evaporation. The latter consists of melting and evaporating metals at high temperatures and allowing a film to form on top of wafers. But, this conventional method is very expensive, uses a lot of energy, and may also be unsafe due to the high voltage used.
Now, University of Minnesota researchers have developed a way to evaporate these metals at significantly lower temperatures, fewer than 200 degrees Celsius instead of several thousands. By designing and adding organic ligands—combinations of carbon, hydrogen, and oxygen atoms—to the metals, the researchers were able to substantially increase the materials’ vapor pressures, making them easier to evaporate at lower temperatures. Not only is their new technique simpler, but it also makes higher quality materials that are easily scalable.
"The ability to make new materials with ease and control is essential to transition into a new era of energy economy,” said Bharat Jalan, the senior author of the study, an expert in material synthesis, and an associate professor and Shell Chair in the University of Minnesota Department of Chemical Engineering and Materials Science (CEMS). "There is already a historical link between the innovation in synthesis science and the development of new technology. Millions of dollars go into making materials for various applications. Now, we’ve come up with a simpler and cheaper technology that enables better materials with atomic precision.”
These metals are used to make myriad products, from semiconductors for computer applications to display technology. Platinum, for example, also makes a great catalyst for energy conversion and storage and is being looked at for use in spintronic devices.
“Bringing down the cost and complexity of metal deposition while also allowing for deposition of more complex materials like oxides will play a large role in both industrial and research efforts,” said William Nunn, a University of Minnesota chemical engineering and materials science graduate student, the paper’s first author, and a recipient of the department’s Robert V. Mattern Fellowship. “Now that depositing these metals like platinum will become easier, we hope to see renewed interest in the more complex materials which contain these stubborn metals.”
In addition to Jalan and Nunn, the research team included University of Minnesota Department of Chemical Engineering and Materials Science grad students Anusha Kamath Manjeshwar, Jin Yue, Tristan K. Truttmann, and postdoctoral researcher Anil Rajapitamahuni.
The research was funded primarily by the U.S. Department of Energy, with additional support from the Air Force Office of Scientific Research and the National Science Foundation.
Read the original article, here.
Suggested Items
Ventec Promotes Bill Wang to Group Technical Vice President
10/14/2024 | VentecVentec International Group, a Taiwan Stock Exchange listed global supplier of advanced base materials for the PCB industry worldwide, has promoted Bill Wang to Group Technical Vice President.
DuPont Announces Two Technology Leaders as DuPont Laureates
10/11/2024 | PRNewswireDuPont announced that two of its technology leaders have achieved the professional distinction of DuPont Laureate, the company's most distinguished technical designation.
The SD11 Inkjet Printer and Ventec Giga Solutions
10/10/2024 | Marcy LaRont, PCB007 MagazineVentec expanded last year to provide greater portfolio solutions to its customers, all of which are aligned with Ventec’s core business in laminates and distribution products. I sat down with Ventec Giga Solutions’ Commercial Director Leigh Allinson, who is deeply rooted in both the PCB and supply chain sectors. He explores the innovative realms of the company and its cutting-edge SD11 inkjet printer. Leigh brings insight into the fabric of the electronics manufacturing industry through the lens of pushing technology limits and delving into the strategic expansions of Ventec Giga Solutions.
Zhen Ding Technology Reports Record Revenue and Profitability in Q3 2024
10/09/2024 | Zhen Ding TechnologyZDT achieved consolidated revenue of NTD 58.2 billion in Q3 2024, reflecting an impressive 28.3% year-over-year growth. This record-breaking performance was driven by strong demand across all of the company’s business segments, particularly in high-density interconnect (HDI) and rigid-flex PCBs.
Site Consolidation at Würth Elektronik
10/09/2024 | Wurth ElektronikWürth Elektronik Circuit Board Technology, printed circuit board manufacturer headquartered in Niedernhall, Baden-Württemberg, announced at the company meeting the planned closure of its PCB production in Schopfheim.