Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
Marcy’s Musings: Advancing the Advanced Materials Discussion
The Marketing Minute: Cracking the Code of Technical Marketing
iNEMI’s Call-for-Participation Webinar: PCB Characterization for CAF and ECM Failure Mitigation Project
August 31, 2022 | iNEMIEstimated reading time: 1 minute
CAF (conductive anodic filament) failures are an electrochemical migration (ECM) process that causes short circuits in PCBs. iNEMI’s Characterization for CAF and ECM Failure Mitigation project will assess several areas of concern related to CAF failure: (1) scaling and integration of laser and mechanical drill features, (2) incoming quality measures of glass/resin systems, and (3) manufacturing process factors that may limit future targets and demands. The project plans to:
- Lower design reliability risk through characterization and study of focused incoming material and process factors driving CAF.
- Enable pitch scaling and higher density board technologies and identify high risk PCB technology features.
- Develop a better understanding of CAF through hardware failure analysis and build awareness of failure mechanisms.
- Enable predictive methodologies for laser and mechanical drill features.
- Reduce product qualification costs and associated timescales.
Registration
Join our information webinar September 7 or 8 to learn more about this project and how it can benefit your company. Two sessions are scheduled (with the same content) and are open to industry. Advance registration is required. For additional information, visit iNEMI's website.
Session 1
Wednesday, September 7, 2022
8:00-9:00 a.m. PDT (US)
11:00 a.m.-12:00 p.m. EDT (US)
5:00-6:00 p.m. CEST (Europe)
Session 2
Thursday, September 8
7:00-8:00 a.m. CST (China)
4:00-5:00 p.m. PDT (US) on September 7
7:00-8:00 p.m. EDT (US) on September 7
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Alternative Manufacturing, Inc. (AMI) Announces Commitment to Excellence in Industrial, Defense, Aerospace, Renewables, and Robotics Markets
09/16/2025 | Alternative Manufacturing, Inc.Alternative Manufacturing, Inc. (AMI), a 100% employee-owned contract manufacturer, proudly reaffirms its leadership in the electronics manufacturing services (EMS) industry with a continued commitment to delivering high-quality PCBAs and box builds across the industrial, defense, aerospace, renewable energy, and robotics markets.
Sustainability and Selective Soldering
09/15/2025 | Dr. Samuel J. McMaster, Pillarhouse InternationalSustainability is more than just a buzzword for the electronics industry; it’s a key goal for all manufacturing processes. This is more than a box-ticking exercise or simply doing a small part for environmentally friendly processes. Moving toward sustainable solutions drives innovation and operational efficiency.
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).
Integrating Uniplate PLBCu6 With the Digital Factory Suite
09/12/2025 | Giovanni Obino and Andreas Schatz, MKS' AtotechPrinted circuit board manufacturing is rapidly changing, driven by miniaturization, stringent reliability requirements, and growing pressure for sustainable production. Meeting these challenges requires more than incremental improvements; it demands a combination of precise equipment and real-time process intelligence. The pairing of Uniplate® PLBCu6 with the Digital Factory Suite (DFS) demonstrates how hardware and software can work together to create more responsive, resource-efficient manufacturing.