IDTechEx Discusses Thermal Interface Materials Breaking the Status Quo as EV Batteries Evolve
March 22, 2023 | PRNewswireEstimated reading time: 2 minutes
Thermal Interface Material (TIM) plays an important role in power electronics, computing processors, sensors, and energy storage devices. TIMs are the materials used to fill the void between heat sources and heat sinks to enhance heat transfer. TIMs come in a variety of forms, including gap pads, thermal greases, thermally conductive adhesives, and phase change materials. The form varies significantly across target application areas, cost, and ease of mass deployment. With the ever-increasing power demand and heat generation for many emerging industries, such as data centers, 5G, and advanced driver-assistance systems (ADAS), TIMs are experiencing rapid growth and evolution, leading to significant market opportunities and massive potential for each of the target industries.
Electric Vehicles (EVs) are a fast-growing market; IDTechEx forecasts that electric vehicle markets across land, sea, and air will generate US$2.6 trillion by 2042 with a double-digit annual growth rate. The battery is undoubtedly one of the most important components of an EV. Together with the fast adoption of EVs, there is also a trend for higher power density, larger battery capacity, and faster charging.
The most used TIM forms in the EV battery industry include gap pads, gap fillers, and thermally conductive adhesives (TCAs). There is no "one-size-fits-all" solution when it comes to TIM form, and the choice is ultimately subject to battery design configuration. Gap filler is by far the most widely adopted TIM for EV batteries at this stage, thanks to their superior ability to be efficiently dispensed at high volumes. However, in order to increase energy density and achieve a longer range, EV batteries have been shifting from modular to cell-to-pack designs. This shift is expected to have profound impacts on the adoption of TIMs. Modular battery designs consist of multiple individual battery modules connected to form a battery pack. Each module has a separate casing and requires a separate TIM to transfer heat from the cell to the cooling system. In contrast, the cell-to-pack design combines the battery cells into a single, large battery module, eliminating the need for separate module housings and TIMs.
This battery transition reduces TIM usage per vehicle as there are fewer thermal interfaces between the cells and the cooling plate. The elimination of module housings means cells can directly contact the cooling plate, thereby changing the performance requirements of the TIM. The TIM needs to transfer heat efficiently to avoid hotspots, as well as present good material compatibility with the cold plate. As the TIMs are positioned directly between the cells and the cold plate, an increased adhesion of TIMs is needed to stick the cells and cold plates together. Therefore, IDTechEx forecasts thermally conductive adhesives to be increasingly adopted thanks to this battery design transition, and by 2020, the market size of TCA within the EV industry is expected to have a 15-fold increase. More details about the opportunities associated with this transition are included in IDTechEx's latest research, "Thermal Interface Materials 2023-2033: Technologies, Markets and Opportunities".
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Adura Solutions Exhibits at Del Mar 2024
04/18/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year's Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.