Airbus Achieves In-flight Autonomous Guidance, Control of a Drone from a Tanker Aircraft
March 28, 2023 | AirbusEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/9216/9087/1261/first_flight_automate_demonstrator.jpg)
Airbus Defence and Space and the company’s wholly-owned subsidiary, Airbus UpNext, have achieved in-flight autonomous guidance and control of a drone using an A310 MRTT.
In a first step towards Autonomous Formation Flight and Autonomous Air-to-Air refuelling (A4R), the technologies demonstrate a significant breakthrough for future aerial operations involving manned and unmanned assets.
These cutting-edge, ‘Made in Europe’ solutions could reduce crew fatigue and the potential for human error, as well as minimising crew-training costs and providing more effective operations.
“The success of this first flight-test campaign paves the way for developing autonomous and unmanned air-to-air refuelling technologies,” said Jean Brice Dumont, Head of Military Air Systems at Airbus Defence and Space. “Even though we are at an early stage, we have achieved this within just one year and are on the right track for manned-unmanned teaming and future air force operations where fighters and mission aircraft will fly jointly with drone swarms.”
Known as Auto’Mate, the technologies were integrated on an A310 MRTT flying testbed, which took off from Getafe, Spain, on 21 March, and on several DT-25 target drones, acting as receiver aircraft and flying from Arenosillo Test Centre (CEDEA) at Huelva, Spain.
Over the waters of the Gulf of Cadiz, the control of the drone transitioned from a ground station to the A310 MRTT, autonomously guiding the DT-25 to the in-flight refuelling position.
During almost six hours of flight test, the four successively launched receivers were sequentially controlled and commanded thanks to artificial intelligence and cooperative control algorithms, without human interaction. The different receivers were controlled and guided until a minimum distance of 150 feet (around 45 metres) from the A310 MRTT.
Auto’Mate Demonstrator technology focuses on three pillars:
- Accurate Relative Navigation to precisely ascertain the relative position, speed and attitudes between the tanker and the receiver;
- Intra-Flight Communication between platforms to allow information exchange among the different assets, increasing the autonomy of the system of systems;
- Cooperative Control Algorithms to provide guidance, coordination, consensus and collision-avoidance functionalities to the tanker and the receiver/s.
These pioneering technologies, developed by a European team from Spain, Germany and France, will continue to increase the capability gap among competitors, as well as being re-used in key technological projects, such as the Future Combat Air System (FCAS).
A second campaign is expected towards the end of 2023, exploring the use of navigation sensors based on artificial intelligence and enhanced algorithms for autonomous formation flight. In addition, there will also be two simulated drones flying in the vicinity of the A310 MRTT to demonstrate multi-receiver autonomous operations and collision-avoidance algorithms.
Suggested Items
Airbus to Lead NATO Next Generation Rotorcraft Capability Concept Study
07/26/2024 | AirbusThe NATO Support and Procurement Agency (NSPA) has awarded a contract to Airbus Helicopters to lead a concept study in the frame of the Next Generation Rotorcraft Capability (NGRC) project under which the participants combine efforts to work on design, development and delivery of a medium multi-role helicopter.
Innovative and Cost-effective BGA Re-balling
07/23/2024 | Shavi Spinzi, Nano Dimension/EssemtecA new, high-quality BGA re-balling process, which is integrated into an all-in-one solution of dispensing and placement equipment developed by Essemtec, brings new opportunities for the reapplication of expensive BGA components. This new method seamlessly integrates the sequence of flux deposition and ball (sphere) placement with the subsequent soldering process.
SEMI Applauds U.S. Chips Act Award For Entegris Semiconductor Materials Facility in Colorado
07/01/2024 | SEMISEMI, applauded the United States Department of Commerce's announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support Entegris construction of a state-of-the-art manufacturing center for advanced materials and process solutions for leading-edge semiconductors in Colorado Springs, Colorado.
Lockheed Martin Celebrates Opening Of 122,000-Square Foot, $18M Engineering Facility In North Alabama
05/31/2024 | Lockheed MartinLockheed Martin, U.S. Department of Defense, state and local officials celebrated the opening of the company’s new $18 million engineering facility, labs and demonstration center in Huntsville. The 122,000-square foot facility has space for 500 employees who will advance national security capabilities and drive innovation in North Alabama.
RTX's Collins Aerospace Awarded Survivable Airborne Operations Center Subcontract
05/27/2024 | RTXCollins Aerospace, an RTX business was awarded a multi-billion-dollar subcontract as part of a team led by SNC to design, develop and deliver systems and products for a new aircraft under the U.S. Air Force's Survivable Airborne Operations Center (SAOC) program.