Watch ‘Smarter Manufacturing Through Inspection,’ Final Episode of Smarter Manufacturing Micro Webinar Series
May 24, 2023 | I-Connect007Estimated reading time: Less than a minute
Watch & learn the final episode!
Episode 12, “Smarter Manufacturing through Inspection,” from Koh Young’s new micro webinar series ‘Smarter Manufacturing Enabled with Inspection Data’ is available now.
In this final episode of the series, Koh Young topic expert Ivan Aduna highlights how inspection data, when converted into meaningful information, can contribute significantly to every stage of the SMT line and provide real insights into the root causes of faults, enabling manufacturers to improve production performance and efficiency.
This short 12-part webinar series was designed to complement Koh Young's book, The Printed Circuit Assembler’s Guide to...SMT Inspection, Today, Tomorrow and Beyond, and with each episode lasting just a few minutes, viewers can easily complete the entire series in under an hour. It covers topics such as secure data collection, AI-powered data management and analysis, and leveraging the IPC CFX-QPL to succeed in the transformation to Industry 4.0 and more.
Visit Smarter Manufacturing Enabled with Inspection Data and watch Episode 12, or the entire series, free, today!
Suggested Items
All Flex Solutions Invests in Assembly Inspection Automation
10/17/2024 | All Flex SolutionsAll Flex has acquired an Omron VP9000 3D Solder Paste Inspection System and an Omron VT-S1080 3D Automatic Optical Inspection System for their flexible circuit assembly facility in Bloomington, Minnesota. These acquisitions are one part of All Flex Solutions’ four-year SMT Roadmap to expand the scale and capability of their assembly operations.
Calumet Electronics Leads US Organic Substrate Technology Innovation with KLA Corporation
10/17/2024 | Calumet ElectronicsCalumet Electronics of Michigan today announced it is pioneering organic substrate technology in the United States in collaboration with KLA Corporation, which also has a Michigan headquarters.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Introduction
10/16/2024 | I-Connect007 Editorial TeamDesign for Manufacturing (DFM) is defined as the practice of designing printed circuit boards that meet not only the capabilities of the customer’s assembly manufacturing process, but also the capabilities of the board fabrication process to provide the highest reliability at the lowest possible cost.
Avnet Announces Release of Autodesk Fusion Integration
10/16/2024 | AvnetDesign engineers can now access thousands of reference design schematics, lead time and pricing trends, and fast alternate guidance with the launch of the Avnet App, an add-in for Autodesk Fusion.
Marcy’s Musings: Destination Metallization
10/17/2024 | Marcy LaRont -- Column: Marcy's MusingsTo reach your intended destination, you must have some form of pathway or route upon which to travel. It is much the same with the metallized traces and features on a printed circuit board. They are how electrical signals and power are carried from one point to another in an electronic device. Copper is the most prevalent metal conductor, but other metals are also used to a lesser degree, including gold, silver, tin, and palladium.