-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueDon’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
Additive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
An Optical Update with TTM
April 16, 2015 | Barry Matties, I-Connect007Estimated reading time: 6 minutes
![](https://iconnect007.com/application/files/8316/3116/3833/marika_immonen.jpg)
I recently met with Marika Immonen, manager of R&D optical interconnects at TTM Technologies. We last spoke one year ago. This time, we discussed the optical project that Marika's been leading, as well as the future of optical technology in the PCB industry.
Matties: Thanks for joining me today, Marika. Last year we had a chance to talk about the optical project you have been managing for TTM. Can you start by giving us a quick update on your progress?
Immonen: In the past year, we've managed to scale up the optical PCB fabrication from small scale to realistic form factors. We're currently running a pilot line, capable of handling 16- to 20-inch panels with optical layers. We have made significant developments to support various optical connectors, to pass light in and out of the board.
Matties: Tell us just a little bit about what the basic technology is and how it applies to a board fabricator.
Immonen: Obviously, we know that increasing data rates are pushing copper to extremes. We know 25 Gbps is coming and OEMs are considering even beyond that. Over the past months we've seen increasing interest from various customers to look at the optical alternative. Optical engine products have already pushed optics inside systems, but we develop the next step further and integrate optical layers as part of the PCB itself.
This is what we are showing this year with our partners FCI and Dow Corning: a fully built end-to-end optical link on standard multilayer PCB with 25 Gbps optical engines feeding embedded waveguides terminated by waveguide connectors on both ends. Customers are interested in the mixing of copper and optical technology involving embedded optical signal traces, and our integrated solution provides copper and optical all-in-one. This solution eliminates cables running on top of your card, which is what you see in current optical products and passive waveguide cables in the market.
The board fabricator obviously faces several new challenges in terms of material set, alignment accuracy requirements, compliance with processes and standard board materials, and new testing procedures. The process window in many critical steps is narrower than in standard steps. Yet, we want to utilize the current process infrastructure for cost and compliance. We have built capabilities to achieve this with our factory teams starting from day one, so scaling in volumes is a smaller step versus those who have started with specialized labs for optical parts.
Matties: What sort of advantage does that offer?
Immonen: We provide lower-loss channels, which is particularly an issue with the longer traces. There are no EMI problems with the optical channels nor issues with thermal management. You're able to have denser lines on your tracing layout, so you're able to reduce real estate on board by a factor of 4 to 6.
Matties: How fast can it go?
Immonen: Speed is only one metric; bandwidth density and aggregate throughput are the key factors for optics. Higher channel density and count within the same board space, even with 10, 25 or 40 Gbps per channel, gives you terabit capacity links. Multiplexing adds capacity even further. Also, reducing the layer count—if I had one optical layer, reduced from, say, six signal layers—will reduce your overall cost, thickness, and your materials.
Matties: Are there practical applications? Is this already being applied in the real world?
Immonen: Not yet. We're running multiple customer product programs and evaluating prototype programs, besides working through large consortium programs. Customers are coming from areas such as routing and switching applications, as well as storage applications. Supercomputing obviously uses a lot of optics, but that is a niche business.
Matties: You said reducing layer count from six to one is something you're shooting for, but what is the optimal right now, that you're really comfortable that people can rely on? Is six to one the target?
Immonen: That's realistic, because we can push much more data from that one pipe of optical channel and have many in parallel, less than 100 microns apart. Obviously, when you increase frequency, your copper transmission lines need to be wider apart and you need more space in the electrics, so optical is able to provide you densities that are easily 6x the standard copper traces.
Matties: I understand. What sort of customers are interested in this? Is it primarily telecommunications?
Immonen: Conventional telecommunications, yes, but more and more it is the exponential growth of cloud applications and huge data centers. These centers are extending in size and consume more power to run. The trend is towards distributed and disaggregated systems. That means your computing and memory are physically separated, for instance, in different racks. Then you need high-speed low-latency communication links between them that are only viable by optical means.
Matties: Are there any other competitors to this technology that you're aware of?
Immonen: There are some small, specialized companies, but regarding what TTM specifically focuses on – the high volumes – due to costs and constraints, you have less competition. The ultimate decision is made based on comparison costs to existing mature technology, so we need to be cost-competitive – and to be honest, in that regard there are not yet many, if any, high-volume PCB fabricators with optical PCB products.
Matties: Do you consider this a disruptive technology?
Immonen: It's definitely disruptive. What that means is that, to start with, you need robust technical building blocks including optical waveguides, supporting connectors and transceiver engines to build the functional link within a system. But besides that, designer needs EDA-compliant design tools readily available, design guidelines to easily understand how he can use the optics. The process team requires new testing infrastructures and qualification procedures in factory, and finally we have to provide long term reliability testing data to show evidence of robustness. Otherwise, the customer cannot validate decision of implementation.
Matties: So this is a high-end market application. Do you see it moving down over time?Page 1 of 2
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Beyond Prepreg: The Glassless ‘Revolution’
06/25/2024 | Marcy LaRont, PCB007 MagazineAs our industry rallies around the call to action for HDI and UHDI, we find unparalleled and myriad laminate options. This abundance is rivaled only by the question surrounding them: Can they measure up to the high technology packaging demands required in our near future? Unsurprisingly, recent developments in FR-4-esque materials for high-speed and high-density designs, as well as newer, glassless technology for replacing traditional glass-impregnated laminates and prepreg, are garnering much interest. I caught up with Alun Morgan, technology ambassador for Ventec International Group, to ask about the impending “glassless revolution” and how it’s poised to solve some of our manufacturing challenges.
Connect the Dots: Designing for Reality—Lamination and Materials
06/19/2024 | Matt Stevenson -- Column: Connect the DotsAs many of you have likely figured out, I am quite passionate about the subject of designing PCBs for the reality of manufacturing. I wrote a book about it and I participate in an I-Connect007 On the Line with… podcast series dedicated to the subject. This companion article will focus on multilayer lamination, keeping the bigger picture in mind: Realistic PCB designs should prioritize manufacturability and reliability of the PCB as well as meet the other design requirements. So, one must account for the production variables associated with individual manufacturing partners.
Day 2: A Full Day at the EIPC Summer Conference
06/19/2024 | Pete Starkey, I-Connect007Editor's note: This is the third and final report from the EIPC Summer Conference. It was a bright and early start to the second day of the 2024 EIPC Summer Conference at the European Space Centre, Noordwijk, The Netherlands, June 4-5. A short journey by bus from the hotel in Leiden and our security passes from the day before got us through the gate and to our seats in the Newton Room for Session 4, “Material Studies,” moderated by Martyn Gaudion.
Looking Into Space: EIPC Summer Conference, Part 2
06/17/2024 | Pete Starkey, I-Connect007“Innovative Development of PCB Technology and Design” was the theme of the second session of the 2024 EIPC Summer Conference, June 4-5, at the European Space Centre, Noordwijk, The Netherlands.