A Look at the High-Reliability Interconnect Market
July 15, 2015 | Barry Matties, I-Connect007Estimated reading time: 4 minutes
I-Connect007 Publisher Barry Matties recently met with Mark Cormier of Miraco Inc. to discuss the latest trends and drivers in the high-reliability segment, and their customers' increasing demand for quality.
Barry Matties: Mark, let’s start with an overview of Miraco.
Mark Cormier: We design interconnects and source interconnects. Most of our business is created from the need for a custom interconnect. The vast majority of our opportunities (~85%) are in the medical and military fields that require Class 3 high-reliability solutions. Our commercial business is only 15% of our total business.
The military designs we do are mostly avionics. We've had history in the past with doing a lot of ordinance, but right now that's not our big driver. Our ITAR registration has helped improve our visibility to more military designs.
Our medical designs are predominately medical device types of products. We seem to do very well in that area. It is long lead time, long design cycle.
Matties: What sorts of needs do your customers currently have?
Cormier: Typically they need an interconnect and they are short of time, short of manpower, or short of material knowledge. Miraco’s advantage is we're unbiased in the approach. We don't care if the design requires a flexible printed circuit, a flat flex cable or a wire harness. We can design and source any of the three options and have the capability of building the complete solution at either our North American facilities located in Manchester, New Hampshire or in Tijuana, Mexico. When volumes dictate, and with customer approval, we also have the option of building a full turnkey solution at our off-shore partner’s facilities. In summary, our customers benefit from our local design capability, our global sourcing network, and our multiple assembly options while keeping the quality assurance group in Manchester, New Hampshire.
Matties: When we look at medical electronics, that's a fast-moving market with a lot of changes being made.
Cormier: Yes, it is fast moving, and it slows down because the design cycles are so long from when you do prototyping to actually getting it into production. We just delivered a prototype that got a first-time order for something that we've been working on for eight years. We understand the material traceability requirements that our medical customers operate under.
Matties: When you say design, are you talking about from concept?Page 1 of 2
Suggested Items
The Shaughnessy Report: A Stack of Advanced Packaging Info
12/10/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportIt’s only fitting that this issue on advanced packaging and stackup features a “stackup” of “packages” on the cover. There’s certainly a lot to “unpack” in this issue. As advanced packaging moves further into the mainstream of PCB design, more PCB designers and design engineers are realizing this isn’t a plug-and-play technology. As we see in this issue, advanced packaging can have an impact on the entire design—the stackup in particular.
I-Connect007 Releases New Episode of Meet the Author Podcast: Spotlight on Complex PCB Design
12/10/2024 | I-Connect007I-Connect007 is thrilled to announce the latest installment of its Meet the Author podcast series, hosted by Nolan Johnson. In this episode, Johnson interviews Scott Miller and Brian White of Freedom CAD, who share their expertise on complex PCB design.
Advanced Packaging and Stackup Design: December 2024—Design007 Magazine
12/09/2024 | I-Connect007 Editorial TeamIn this month's issue,, we asked our expert contributors to discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in the arena of HDI and UHDI. And with a little research, planning, and collaboration with the fabricator, any seasoned PCB designer can utilize advanced packaging.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/06/2024 | Marcy LaRont, I-Connect007This week’s must-reads include a discussion on innovation and embedded components within the layers of a PCB with Accurate Circuit Engineering. We revisit the real cost to manufacture in a case study on how a seemingly small design error can have a dramatic effect on your end customer’s costs. Dan Beaulieu provides this month’s book review highlighting the criticality of fostering creativity in the workplace. Bert Horner of The Test Connection discusses his decision to launch a new, complimentary business venture, The Training Connection; and Ramon Roche of NCAB talks about electric vehicle charging.
If You Can Define It Right, You Can Design It Right
12/05/2024 | Andy Shaughnessy, Design007Design engineer Chris Young is known for his optimized design process. As lead hardware engineer with Moog Space and Defense Group and owner of Young Engineering Services, Chris collects data like it’s going out of style, and he leaves nothing to chance. With that in mind, I asked Chris to discuss his views on rules of thumb—which ones work, which ones should be avoided, and how rules fit ideally into the PCB design process.