Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
Automotive EMS: Going Beyond Assembly
September 9, 2015 | Frederick Blancas, Integrated Micro-Electronics Inc.Estimated reading time: 1 minute
As the amount of electronics that go into a car increases, the car is becoming less of a mechanical thing consisting of a few electronics and more of a computer with wheels.
The electronics' share of vehicle value for a state-of-the-art automobile is already at 40% for traditional, internal combustion engine cars, and it could reach 75% for electric or hybrid electric vehicles. This percentage value will definitely rise in the next few years.
Automotive electronics rose by 7.3% in 2014 to about $205 billion and will continue to grow at the same growth rate to 2020, at close to $315 billion based on a report by Research and Markets. The advanced driver assistance systems (ADAS) market will have a 14.9% CAGR from estimated revenue of $39 billion in 2015 to $78.2 billion in 2020, according to Industry ARC.
According to New Venture Research, of the $91.2 billion worldwide automotive electronics assembly value in 2014, 86% was done in-house by the OEMs; 1% by the ODMs; and 13% by the EMS providers.
The automotive industry continues to grow rapidly as a high-growth market for EMS providers as it transitions steadily from mechanical to electronics. The total automotive EMS value of $12.1 billion in 2014 was contributed mainly by the top players that include Flextronics International; Hon Hai Precision Industry Co. Ltd (Foxconn Technology Group); Jabil Circuit Inc.; Zollner Electronik AG; and Integrated Micro-Electronics Inc.
Merely board stuffers—these are not today’s EMS providers in the automotive space. They’ve gone far beyond board stuffing.
The EMS providers are end-to-end solution providers, assisting the automotive electronics makers or automotive manufacturers in product realization. They engage in design and product development, advanced manufacturing engineering, and test and test system development.
Their manufacturing expertise includes PCB and FPCB assembly services, module assembly, and box build assembly. They can offer high-volume manufacturing as well as low-volume and high-mix manufacturing. Some EMS companies can do product reliability and failure analysis, calibration, and product repair services.
Further, while it is common for the tier-one EMS providers to have plastic injection capability, there are also mid-tier EMS players that can offer plastic injection. We can say that the automotive EMS players have expanded their role through vertical integration and venture into the realm of non-electronics manufacturing.
Editor's Note: This article originally appeared in the September 2015 issue of SMT Magazine.
Share on:
Suggested Items
New Podcast Series Launches: Optimize the Interconnect
07/15/2025 | I-Connect007I-Connect007 is excited to announce the debut of Optimize the Interconnect—a new podcast series featuring guest Chris Ryder, senior director of business development at MKS’ ESI. This insightful series explores how MKS’ ESI is rethinking microvia formation for today’s most advanced HDI PCB and substrate designs.
IMI Wins Gold Award for Best Managed Technology Company at FinanceAsia’s 29th Asia’s Best Companies Awards
07/01/2025 | IMIIntegrated Micro-Electronics Inc. (IMI) has been awarded the prestigious Gold Award for Best Managed Technology Company at the 29th edition of the Asia’s Best Companies Awards, hosted by FinanceAsia.
IMI Signs Share Purchase Agreement to Sell Its Czech Republic Manufacturing Site
06/06/2025 | IMIIntegrated Micro-Electronics Inc (IMI), through its wholly-owned subsidiary, Coöperatief IMI Europe U.A., has signed a share purchase agreement to sell 100% of the shares in IMI Czech Republic (IMI CZ) to KEBODA Deutschland GmbH & Co. KG, a subsidiary of Keboda Technology Co., Ltd. (Keboda), a publicly listed company in China.
Moving Forward With Confidence: SMT007 Magazine June 2025
06/02/2025 | I-Connect007 Editorial TeamAre you as prepared to close a sale as you could be? IPC’s monthly EMS reports showed that EMS revenue increased in March and April. With a book-to-bill ratio of 1.41, things are moving fast. That said, EMS shipments in April were down 1.4%, and bookings in April decreased by 10% year over year. In the June 2025 issue of SMT007 Magazine, we discuss best practices to keep your business thriving.
Trouble in Your Tank: Yield Improvement and Reliability
05/22/2025 | Michael Carano -- Column: Trouble in Your TankThere’s a simple rule of business in manufacturing: “It is all about yields.” Higher yields for your products allow for increased profits and satisfied customers. When there are lower yields, overall cost to manufacture increases, and the additional time and strain on the factory floor affect the entire operation. Lower yields are often the result of “process drift,” when critical process parameters and specialized plating additives fall outside their acceptable ranges.