Portable Device can Quickly Determine the Extent of an Eye Injury
December 9, 2015 | University of Illinois at Urbana-ChampaignEstimated reading time: 2 minutes
An engineer and an ophthalmologist are developing a portable sensor that can quickly and inexpensively determine whether an eye injury is mild or severe. The device, called OcuCheck, measures levels of vitamin C in the fluids that coat or leak from the eye. The sensor could speed efforts to determine the extent of eye injuries at accident sites, in rural areas lacking ophthalmology specialists or on the battlefield, the researchers said.
"The sensor takes advantage of the fact that the ocular tear film - the viscous fluid that coats the eyeball - contains low levels of ascorbic acid, which is just vitamin C, while the interior of the eye contains much higher levels," said University of Illinois bioengineering professor Dipanjan Pan, who is creating the device in collaboration with Carle ophthalmologist Dr. Leanne Labriola. "So the concept is, if there is severe damage to the eye that penetrates deeply, the ascorbic acid will leak out in high concentration."
Two postdoctoral researchers in Pan's laboratory, Manas Gartia and Santosh Misra, helped develop the new sensor. The researchers report their work in the journal Scientific Reports.
At present, those with eye injuries must find their way to a hospital to have their injuries assessed. The process is often complicated, time-consuming and imprecise, Pan said.
"The new device will change the standard of care for evaluating eye traumas," Labriola said.
No current techniques for assessing eye injuries involve measurements of ascorbic acid, Pan said. "So this is a one-of-a-kind approach."
The new sensor uses graphene platelets that are layered 1 nanometer thick on filter paper. Upper layers include a unique polymer that interacts with the graphene; gold electrodes; and ascorbate oxidase, an enzyme that binds to ascorbic acid.
"The idea is that the moment that the ascorbic acid comes in and binds to the ascorbate oxidase, it will pull the polymer out of its interaction with the graphene," changing the sensor's electrical properties, Pan said.
Page 1 of 2
Suggested Items
NEC Technology Reliably Measures Sea Levels from a Greater Distance
07/16/2024 | JCN NewswireNEC Corporation has developed a technology for measuring sea levels with high accuracy from greater distances using 3D Light Detection And Ranging (LiDAR), a remote sensing technology.
Merlin Circuit Technology Receive NADCAP Recertification
06/24/2024 | Merlin Circuit TechnologyMerlin Circuit Technology Limited is pleased to announce they have been awarded Nadcap Merit status.
Rogers Announces Further Actions to Streamline Operations and Drive Margin Improvement
06/07/2024 | Rogers CorporationRogers Corporation announced plans to drive further operational efficiency and margin improvement. Rogers intends to wind down manufacturing of advanced circuit materials and other related activities at its Evergem, Belgium factory by mid-2025.
High Temperature Component Warpage as a Function of Moisture Sensitivity (MSL) Rating
05/29/2024 | Neil Hubble, AkrometrixMoisture sensitivity requirements for non-hermetic surface mount devices are defined in the joint IPC/JEDEC standard J-STD-020E, “Joint IPC/JEDEC Standard for Moisture/Reflow Sensitivity Classification for Non-hermetic Surface-Mount Devices,” last updated in December 2014. This standard allows customers and suppliers to place electronics devices into specific categories, defined into 8 different moisture sensitivity levels (MSL). Test method criteria are defined within this standard to define MSL levels for different packages. A subsection of MSLs are shown in Figure 1 below, showing the MSL 3 and 4 used in this study.
Real Time with… IPC APEX EXPO 2024: Circuit Board Testing Strategies and the Impact of AI
05/08/2024 |Editor Marcy LaRont speaks with Bert Horner, president of The Test Connection, about the importance of strategic planning and design-for-test (DFT). Bert touches on some common mistakes that occur when DFT is not adequately considered early on. The discussion outlines an overarching industry need for a culture shift toward increasingly higher levels of integration and collaboration. Bert mentions that AI now has an influence on testing, as everywhere else, and announces his forthcoming book.