The Associations Issue
December 15, 2015 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
Well, it’s the end of the year. How did that happen? It really is true that every year goes by a little faster. You young whippersnappers out there won’t know what I’m talking about, but just you wait and see.
We changed it up for our December issues this year. Instead of doing a year-end review, we decided to devote this month to our associations and trade organizations—at least some, because when you start poking around, you will find there are scads of them.
I’ve been involved in IPC activities since ‘80 or ’81; I’m not sure anymore. I have made a ton of friends in this crazy industry of ours, learned a tremendous amount, and put in a lot of hours on subcommittee meetings and document writing. I started out by volunteering to chair the Process Effects Task Group and we put out a pretty complete PCB Troubleshooting Guide within two years or so—amazing at the time. We went through a few revisions over the years, and then I moved on to chair the Glass Reinforcement Task Group and in the meantime, served as TAEC chairman (explained later).
The key word here is “volunteer.” I know many or you can’t quite make that connection between volunteering and “I have learned so much,” but that truly is a great way to learn— much better than a classroom (go ahead, ask any volunteer). Even if you are writing just a paragraph or two for a document, you will research the heck out of it to make sure you have the right information, but you’ll also have this network of other volunteers to call upon for help.
The other connection to make is this: When you are working on a standard or specification you really can have input. The standards you use every day are not pulled out of thin air, nor are they written automatically by computers. They are written by people just like you. Tests are performed to verify data by member companies—just like yours—big or small.
Read the article here.
Editor's Note: This article originally appeared in the December 2015 issue of The PCB Magazine.
Suggested Items
Calling All California Employers: Harness State Funding for Workforce Training with IPC and ETP
09/05/2024 | IPCIPC, a global industry association dedicated to its member companies' competitive excellence and financial success, announces a pivotal opportunity for California employers under the Employment Training Panel (ETP) program.
WHMA/IPC Issues Call for Participation for Electrical Wire Processing Technology Expo 2025
09/04/2024 | IPCWHMA/IPC invites engineers, researchers, academics, technical experts, and industry leaders to submit proposals for the Electrical Wire Processing Technology Expo (EWPTE), to be held May 6-8, 2025 at Baird Center in Milwaukee, Wis. The deadline for proposals is on November 8, 2024.
Opportunity Knocks
09/04/2024 | Michelle Te, IPC CommunityIPC member DETEX Corporation of New Braunfels, Texas, like so many similar companies, strives to cultivate a highly skilled workforce to meet the growing demand for electronics assembly professionals. But also like many companies, DETEX, which engineers and manufactures security products, has struggled to hire qualified workers. Most employees are hired without certification or experience. Providing on-the-job training (OJT) without technical instruction has been met with limited success.
TRI’s High-Performance Inspection Solutions at SMTAI 2024
08/27/2024 | TRITest Research, Inc. (TRI) is joining the upcoming SMTA International Exposition & Conference on October 22 – 24, 2024, at the Donald E. Stephens Convention Center, Rosemont, IL, USA.
Give Yourself an Edge at the IPC High Reliability Forum 2024
08/27/2024 | Marcy LaRont, PCB007 MagazineFor those who support military and defense products, few topics are more important than reliability, particularly as we venture into complex packaging requirements that accommodate next-gen chips and electronic systems. Recently, I visited with Teresa Rowe, IPC senior director, assembly and standards technology, to discuss the IPC High Reliability Forum (HRF), Oct. 9-10, at the McKimmon Center, in Raleigh, North Carolina. With topics that cover high-voltage electronics, standardized test methods, and assembly and solder joint X-ray challenges, it is clear that this event needs to be included on your annual conference calendar.