In the War Against Dust, a New Tool Inspired by GeckosApril 26, 2016 | Yale University
Estimated reading time: 3 minutes
Micrometric and sub-micrometric contaminant particles — what most of us call “dust” — can cause big problems for art conservators, the electronics industry, aerospace engineers, and others. These nanoparticles can prevent a cellphone from working or rob the vitality of a painting’s colors.
Drawing from the forces of static cling and the science behind gecko feet, the lab of Yale School of Engineering & Applied Science Dean T. Kyle Vanderlick has developed a promising tool in the war on dust. The results appear in the journal ACS Applied Materials and Interfaces. Hadi Izadi, a postdoctoral associate, is the paper’s lead author.
Vanderlick’s lab, which focuses on thin films and surface properties, took on the dust problem shortly after Yale established art conservation labs at its Institute for the Preservation of Cultural Heritage (IPCH) at the Yale West Campus. Vanderlick said the project is particularly characteristic of Yale, where collaborations between disciplines are strongly encouraged.
“This wouldn’t have happened without the art scientists and conservators at the IPCH working with the researchers in our lab,” she said.
The lab worked with a number of Yale art conservators in developing the technology. Cindy Schwartz, assistant conservator of painting at the Yale University Art Gallery, said dust is particularly a problem for her when it comes to modern paintings that feature acrylic paint.
“Acrylic paints are incredibly porous, so anything you’re putting on the surface could get into the pores, and then work from the insides of the pores to soften the paints,” Schwartz said, adding that the new technology has the potential to solve this long-standing problem.
If dust particles are bigger than 10 micrometers, removing them can be achieved with minimal fuss, usually with an air jet or nitrogen jet. It’s a whole other world of trouble for particles less than 10 micrometers. There are plenty of methods of removal, but each has its drawbacks. Wet cleaning is limited in its ability to remove particles, and can possibly damage the object being cleaned. In recent years, the electronics industry and art conservators have turned to dry cleaning techniques, such as lasers, micro-abrasive particles, and carbon dioxide snow jets. They remove dust well, but can be just as damaging to artwork as wet cleaning methods.
The Yale researchers’ solution is deceptively simple. In the lab, Izadi holds up what looks like an ordinary plastic sheet. It’s actually an elastic and non-sticky polymer, polydimethylsiloxane (PDMS). Put it under a microscope, and you can see millions of tiny columns. Depending on the size of dust particles you’re removing, the pillars range from 2 to 50 micrometers in diameter — bigger particles require bigger pillars.
Izadi is very familiar with fibrillar structures and micropillars. His previous research explored the mystery of how geckos effortlessly stick to walls. It turns out that a lot of it has to do with electrostatic charges and the microscopic pillars on the pads on their feet. Applying some of this science to cleaning microparticles made sense, he said. “When you’re talking about dust, you’re talking about electrostatic charges.”
The micropillar structures used for dust cleaning, however, differ from those of geckos in that they’re designed specifically not to stick. The PDMS polymer has minimal interaction with the substrate — whether it’s an iPhone or a sculpture — but it produces enough electrostatic charge to detach the dust particles.
Once you match up a sheet with the appropriately sized pillars, cleaning is simply a matter of tapping the polymer on the surface. Particles absorbed by the polymer go around the pillars. Tests on various surfaces in the lab have shown total cleaning of silica dust particles and no damage to the surface.
Although her lab is new to art preservation, Vanderlick noted, there’s much to engage researchers in her field.
“Dust is something at the nanometer level,” she said. “And there’s a lot of interesting thin film, surface, and interfacial physics associated with the preservation of art.”
HyRel Technologies Attains ITAR Registration, Reinforcing Leadership in Robotic Solder Component Tinning11/27/2023 | HyRel
HyRel Technologies, a global provider of quick turn semiconductor modification solutions, announces the achievement of International Traffic in Arms Regulations (ITAR) registration.
MIT’s Department of Aeronautics and Astronautics (AeroAstro) recently hosted the 2023 Future Leaders in Aerospace Symposium, inviting women and underrepresented minorities in aerospace fields to campus for a two-day program.
NEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, is thrilled to welcome James Doyle to the team as Chief Executive Officer of NEOTech’s Aerospace & Defense division, effective immediately.
Vuzix Corporation, a leading supplier of smart glasses and Augmented Reality (AR) technology and products, announced it has completed delivery against a follow-on order from a Tier-1 aerospace and defense contractors with which it has been working with.
Collins Aerospace recently expanded its services for airport operator AIRPLAN S.A.S. for a host of airport solutions that streamline passenger processing, enable self-service options and manage operations for six airports in Colombia’s northern central region.