Global Citizenship: Understanding Global Citizenship as a Competitive Advantage
Global Sourcing Spotlight: Tariffs—The New Reality
Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
The Authors of the Printed Circuits Handbook 'Speak'
August 30, 2016 | I-Connect007Estimated reading time: 2 minutes
Editor’s Note: The seventh edition of the Printed Circuits Handbook was published this spring, which was also the 50th anniversary of the first edition. For this issue—“Voices”—we asked the many authors of the handbook for their thoughts—their voices. We asked a few questions to get them started; though not everyone spoke strictly about the handbook, we found their comments interesting and thought-provoking, and we hope you do as well. We begin with a wonderful history of the Handbook by the main man himself, Clyde Coombs.
Clyde Coombs Editor-in-Chief (Chapter 1)
The Printed Circuits Handbook is now in its seventh edition, and we are observing the 50th anniversary of the publication of the first edition. This long-term level of importance in an industry is remarkable, but the need for this book seems obvious today. This is to put the concept of the book into the context of the industry when the first edition was published, and try to explain why there was a book in the first place, and what led to this long string of successful subsequent editions.
Touring a modern, technology- and capital-intensive, highly-automated printed circuit factory of today, supported by a staff of trained specialists, many with advanced degrees in science, engineering and systems, would be a totally different experience than touring a printed circuit shop of 1959. For the most part, those shops were the creation of entrepreneur artisan platers or silk screeners, and the facilities were called “bucket shops” for good reasons. With the exception of IBM, Collins Radio, RCA, and a few others, along with the founding members of IPC, the estimated several thousand shops in the United States (numbers at the time ranged from 4,000 to 7,000) were operated by rules of thumb, years of experience in related trades, and generally considered an art, not a technology.
Shops were divided into two categories: captives, which made boards as a part of a vertically integrated OEM, and independents, which made and sold boards to OEMs that did not make their own. Both categories of shops could be justified since it was generally accepted that it did not take significant technical skill, or a large capital expenditure to start a shop. However, in 1959, the printed circuit world was on the brink of a major revolution that few shops were prepared to cope with, and most shop managers did not understand. The spark for this was the sudden introduction, and swift adoption, of the transistor into electronic devices. As vacuum tubes disappeared, and more functionality was designed onto much smaller boards, there was a sudden need to be able to connect circuits on both sides of a board reliably.
Editor's Note: This article originally appeared in the August 2016 issue of SMT Magazine.
Share on:
Suggested Items
Tax Policy Update from IPC: The House Tax Bill, and What It Means for Electronics Manufacturers
05/20/2025 | IPCOn May 13, the House Ways and Means Committee advanced a major tax package that includes several provisions supported by IPC. These provisions—including restoring bonus depreciation, immediate R&D expensing, and strengthening the pass-through deduction—were identified by IPC members as key tools that would help them invest, grow, and compete more effectively.
Zero Touch Data Package: The Future of Seamless PCB Manufacturing
05/22/2025 | Dana Korf, Victory Giant TechnologyImagine a day when a design data file—not a traditional documentation package—is output directly from the eCAD system, transmitted to selected fabricators, and automatically loaded into their engineering/CAM systems, initiating tooling and production without any human intervention. This is zero touch data transfer in action. By eliminating manual processes, front-end personnel at fabrication facilities can be redeployed to strategic areas such as R&D and customer engagement.
Trouble in Your Tank: Yield Improvement and Reliability
05/22/2025 | Michael Carano -- Column: Trouble in Your TankThere’s a simple rule of business in manufacturing: “It is all about yields.” Higher yields for your products allow for increased profits and satisfied customers. When there are lower yields, overall cost to manufacture increases, and the additional time and strain on the factory floor affect the entire operation. Lower yields are often the result of “process drift,” when critical process parameters and specialized plating additives fall outside their acceptable ranges.
Recognizing IPC Scholarships, Awards, and Opportunities
05/21/2025 | Charlene Gunter du Plessis, IPC Education FoundationThere was no better way to end our year in 2024 than by recognizing hard-working and driven students and educators for their involvement and interests in the electronics manufacturing industry. Through the IPC Scholarship and Awards program, we can help students invest in their future and reward their hardworking and dedicated accomplishments.
IPC Report Recaps Imperatives in Global Chip Race
05/19/2025 | IPCWith funding awards under the U.S. CHIPS and Science Act currently under review, IPC just shared a new Industry Intelligence Report focused on the issues and players involved.