Reconfigurable Chaos-based Microchips Offer Possible Solution to Moore’s Law
September 23, 2016 | NC State UniversityEstimated reading time: 2 minutes
Researchers at North Carolina State University have developed new, nonlinear, chaos-based integrated circuits that enable computer chips to perform multiple functions with fewer transistors. These integrated circuits can be manufactured with “off the shelf” fabrication processes and could lead to novel computer architectures that do more with less circuitry and fewer transistors.
Moore’s law states that the number of transistors on an integrated circuit will double every two years in order to keep up with processing demands. Previously this goal has been addressed by shrinking the size of individual transistors so that more could be added to the chip. However, that solution is quickly becoming untenable, and the semiconductor industry is looking for new ways to create better computer chips.
“We’re reaching the limits of physics in terms of transistor size, so we need a new way to enhance the performance of microprocessors,” says Behnam Kia, senior research scholar in physics at NC State and lead author of a paper describing the work. “We propose utilizing chaos theory – the system’s own nonlinearity – to enable transistor circuits to be programmed to perform different tasks. A very simple nonlinear transistor circuit contains very rich patterns. Different patterns that represent different functions coexist within the nonlinear dynamics of the system, and they are selectable. We utilize these dynamics-level behaviors to perform different processing tasks using the same circuit. As a result we can get more out of less.”
Kia and NC State colleague William Ditto, professor of physics and dean of the College of Sciences, worked on the conception, design, development and fabrication of an integrated circuit chip that contains working nonlinear circuits to perform multiple different digital computations.
Traditionally, transistor-based circuits perform one task each. Computer processors operate by routing each instruction and its operands to the appropriate transistor circuit on the integrated circuit that implements that specific instruction. In Kia’s design, the transistor circuit can be programmed to implement different instructions by morphing between different operations and functions.
“In current processors you don’t utilize all the circuitry on the processor all the time, which is wasteful,” Kia says. “Our design allows the circuit to be rapidly morphed and reconfigured to perform a desired digital function in each clock cycle. The heart of the design is an analog nonlinear circuit, but the interface is fully digital, enabling the circuit to operate as a fully morphable digital circuit that can be easily connected to the other digital systems.”
The researchers have produced an alternative approach for computing that is compatible with existing technology and utilizes the same fabrication process and CAD tools as existing computer chips, which could aid commercial adoption.
“We believe that this chip will help solve the challenges of demands for more processing power from fewer transistors,” Kia says. “The potential of 100 morphable nonlinear chaos-based circuits doing work equivalent to 100 thousand circuits, or of 100 million transistors doing work equivalent to three billion transistors holds promise for extending Moore’s law – not through doubling the number of transistors every two years but through increasing what transistors are capable of when combined in nonlinear and chaotic circuits.”
“We are nearing commercial size and power and ease of programming in our evolving designs that could well be of significant commercial relevance within a few months with our three month design/fabrication cycle of improvements and implementations,” Ditto says.
Suggested Items
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Trackwise Awarded Prestigious King’s Award for Enterprise for Innovation
04/24/2024 | TrackwiseTrackwise Designs plc, the innovative manufacturer of specialist products using printed circuit technology, is delighted to be recognised with a prestigious King’s Award for Enterprise. Announced, Friday 21 April, Trackwise has been recognised for its excellence in Innovation for its length-unlimited, multilayer flexible printed circuits.