-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Let's Talk Testing: Don’t Reinvent the Wheel—Find an Expert!
October 18, 2016 | Keith M. Sellers, NTS-BALTIMOREEstimated reading time: 4 minutes
Back in the day when I was an engineer fresh out of college, I quickly learned that experience is the solution to many problems. Now that being said, experience comes in many forms…it could be knowledge learned from a textbook, it could be an observatory comment jotted down in a notebook, it could be a conversation with a co-worker or colleague, or it could be an Internet search that finds a scholarly technical article, etc. My point is that “experience” is all around you if you’re eager and willing to look for it, and when problems or issues arise, tapping into that experience is invaluable.
Expanding on that idea, it’s likely, unless you’re working in a cutting-edge, R&D-driven field, that someone out there in the world has dealt with a similar (or possibly the same exact) issue/problem that you are currently facing. My advice to you today is to seek out that information and utilize the knowledge and experiences of others before you as best you can. As an example, the Internet is an almost bottomless pit of information and when used appropriately can likely get you the information that you need or, at the least, get you headed in the right direction.
Technical knowledge and experience can be found in many places and in some cases, a good bit of the hard work in finding those places may have already been done by others, so why not make your life easier by learning from their experiences? Focusing in specifically on the printed circuit board/assembly world, a good place to start is with IPC. For those not familiar with IPC, it is an organization that has been around for nearly 60 years, focused on the advancement of all sectors of the printed circuit board world—design, manufacturing, assembly, and test. With respect to our topic today, this organization’s membership is heavily populated with true experts in the printed circuit board field and if a problem arises in your day-to-day travels, it’s very likely that someone within IPC can help you solve it, as they have probably dealt with it before.
IPC has a couple of specific areas that can be used for your benefit. Various conferences and meetings throughout the year are held around the world. These events typically contain technical sessions, where someone can learn about a variety of topics pertinent to the printed circuit board world, as well as meetings in which various sectors of the industry are discussed at the highest levels. Of specific interest to many would be the standards development meetings that occur twice per year. These meetings focus on the many test methods and test specifications that IPC issues for the industry and the sessions are organized into various topics. A tremendous amount of experience can be found in any of the meeting rooms and much information can be gleaned just by attending and listening. The chairpersons and co-chairpersons of the various committees and task groups are all experts in their fields and the attendance in a single meeting will likely span all four of the sectors mentioned above: design, manufacturing, assembly, and test.
In addition to the conferences and meetings, IPC also has a Validation Services division. This group is tasked with qualifying companies to a variety of lists, depending on their specific role in the industry. Specifically, there is a Qualified Products List (QPL), a Qualified Manufacturers List (QML), and a Qualified Test Laboratories list. From these lists, you can search for companies and contacts that can likely help you directly with the issue you are dealing with. For example, if there is a widget that you are looking to obtain to help with your issue, it’s possible it already exists and the QPL could help you find a source. At the same time, if you’re in a time or resource crunch and you need help with your production process, using the QML might be a good resource. And, lastly, if some form of testing is of interest, the Qualified Test Laboratories list could be a good place to start. Similar to IPC, the Defense Logistics Agency (DLA), which is a supporting agency of the Department of Defense, also has QPL and QML lists in the military arena…along with a certified list of test laboratories that are suitable for testing PCB-related items for military-based applications. Once again, these various lists are stacked with knowledgeable colleagues and companies that can surely help you with the issue you are currently dealing with.
While there is certainly merit in the notion of solving a problem completely and totally on your own, that never really happens if you think about it, as you’re utilizing someone else’s experience in some way or another whether you realize it or not. Even a “problem” as simple as being asked to draw a line on a piece of paper is “solved” by understanding Euclid’s geometric principals. It’s his “experience” that allows you to solve the problem, whether you know who Euclid is or not! So when a problem or issue arises, don’t be afraid to ask around and get some help. Experts (and information) in all varieties of fields are everywhere if you’re willing and able to search them out.
Keith M. Sellers is operations manager with NTS in Baltimore, Maryland.
Editor's Note: This article originally appeared in the October 2016 issue of The PCB Magazine.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.