-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Increasing Reliability through Predictive Analysis
November 4, 2016 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes
At SMTA International 2016, I caught up with Joe Russeau, president of Precision Analytical Laboratory, to discuss the paper he was presenting, which was co-authored by Mark Northrup and Tim Estes. Entitled, “Chemical Data vs. Electrical Data: Is One a Better Reliability Predictor,” the paper presents early data comparing the results of two different analytical test methods to determine how well they correlate with each other as predictors of PC board cleanliness and reliability.
Patty Goldman: Joe, can you please tell me, and our readers, a little bit about your co-authors?
Russeau: Mark Northrup is the VP of Technology for IEC Electronics. He’s the one that got us started on this project. Tim Estes is the CEO for Conductor Analysis Technologies.
Goldman: Tim is the PCQR² guy. So tell me about your involvement.
Russeau: As for my involvement, I own and operate a cleanliness testing lab. My focus at the lab is on residue analysis, so we do ion chromatography, surface insulation resistance and electrochemical migration testing. In my view, the three of us, with our different backgrounds, were an excellent fit to work together on this kind of study.
Goldman: So tell us about the paper and what prompted this testing.
Joe Russeau: Basically our paper is trying to compare whether or not there's any correlation between the electrical data generated by the PCQR² test—that's a conductive anodic filament (CAF) test—and IPC's ion chromatography test (IPC-TM-650, method 2.3.28). The concern here is that within the industry, there is an increasing drive to smaller devices. Component population densities are increasing as board real estate shrinks. Hence, there is an increased urgency in understanding cleanliness impacts to product reliability and how to accurately measure those risks before product goes into the field. The basis of the study was to compare what is currently available industry wide to ascertain which technique was better at predicting reliability. Mark Northrup, who is the primary researcher on this project, approached me and asked a couple of questions. The first question he asked was, “Do you know of any studies that show a correlation between the chromatography testing and any IPC electrical test?” To which I responded, “No, I wasn’t aware of any.” He followed up with a second question, which was, “Is one a better predictor of reliability?” To that I said, “I don’t have an answer.” Then he asked me if I'd be interested in participating in a study to try and determine an answer and that's how I got involved.
Goldman: I take it you guys have worked on this for some time now?
Russeau: Well, Mark and I have had numerous discussions about the limitations of circuit board cleanliness testing for the past few years. Mark motivated us a little over a year ago to initiate this study, and we did the testing over a span of about six months. We looked at a total of eight different groups of CAF coupons. The CAF coupons we used were the ones that the PCQR² document calls out. We looked at the ionic cleanliness of the coupons before they went into CAF using ion chromatography as a baseline. Subsequently, these tested coupons were submitted for CAF testing. Upon completion of the CAF testing, coupons were retested via ion chromatography for cleanliness again. The idea was to compare residue levels before and after to determine what changes occurred and if the chromatography could predict a CAF failure. Our hypothesis was that we would see a correlation between the CAF and IC tests. We applied IEC Electronics ionic cleanliness limits to the ion chromatography test results and the current criteria used for the PCQR2 test results to evaluate our hypothesis. We postulated that if there were residues that exceeded IEC Electronics ionic cleanliness limits before the CAF test, that corresponding failures should occur in the CAF test results. Of the eight groups, we had four groups that failed IC testing based on IEC Electronics ionic cleanliness limits and also failed CAF testing. The other four groups failed IEC Electronics ionic cleanliness limits, but passed CAF testing.
Based on this data, we drew the conclusion that there wasn't a significant correlation between the two tests, and in addition to that, we could not say definitively that either one of the tests was a better reliability predictor. We are still in the process of reviewing our methodologies and the variables that we want to do to try to improve the testing. We're just here today to present our initial data, hopefully get other people interested in the topic, solicit input as well for other ideas, and start a discussion of how to improve risk prediction for modern devices. Remember, this is just an initial test and is in no way definitive.
Goldman: I understand you’re presenting some early data; it sounds like there's much more to be done.
Russeau: That’s correct. We have a lot more testing to do. Within IPC, I am the chairman of the 7-11 Test Methods subcommittee. I also sit on other task groups related to chromatography and board cleanliness. We deal with these issues within those task groups all the time. We know there are limitations in the IPC test methods and that industry demands improved testing methods as electronics continuously increase in density. We're working both from the standpoint of industry people who are coming together on their own to look for ways to make improvements, and then we're also supporting the IPC test methods committees (e.g., 7-11 subcommittee where we're starting to require validation of methods). Ultimately, we're trying to make sure that IPC test methods correlate and have solid data to support their intended purpose, so we can get to better reliability predictors.
To read this entire article, which appeared in the November 2016 issue of SMT Magazine, click here.
Suggested Items
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.