Marcy’s Musings: Advancing the Advanced Materials Discussion
The Marketing Minute: Cracking the Code of Technical Marketing
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
Aismalibar on Markets, Materials, and the Increase in Copper Prices
December 5, 2016 | Pete Starkey, Barry Matties - I-Connect007Estimated reading time: 15 minutes
As a European laminate provider specializing in insulated metal substrates and thermal management, Aismalibar is often put in the demanding position of catering to some of Europe’s toughest customers, including the automotive industry. Pete Starkey and Barry Matties caught up with Director General Eduardo Benmayor at the most recent Electronica trade show to learn more about the company and get his take on the current state of the IMS marketplace.
Barry Matties: Eduardo, can you begin by telling us a little bit about Aismalibar?
Eduardo Benmayor: Aismalibar is a copper-clad laminate company and we have been in this industry since the beginning of electronics. Aismalibar was one of the first laminate companies in Europe, launching the first laminates in the 1950s. Today we are following electronics and we are concentrated on a niche product in the laminate business, an insulated metal substrate dedicated to thermal management problems. As you know, electronics are getting smaller and smaller every day and heat dissipation is a key factor. We are really dedicated to this segment inside electronics.
Pete Starkey: Eduardo, when we walked into your booth you were forming a very intricate paper doll out of a profiled and etched material. Can you tell us a little bit about that?
Benmayor: That's right. You have seen one of our most popular laminates today. It's called Flextherm. That's a thin aluminum in the range of 0.8 mm to 1.5 mm cladded into copper with a very thin, dielectric layer and it's capable to be formed to different shapes. The goal here is to make flat PCBs, populate them with the components, and then be able to bend and shape them into different forms. The goal of this laminate is to improve the old technology built with a conformed aluminium cladded with a flex PCB on top from one shot of element. Flextherm saves a lot of money on assembly and gives a lot of reliability to the electronic component itself, as technology and thermal performance is much better.
Starkey: That particular circuit that you were forming, what would be the application for that?
Benmayor: That's a real light of a BMW 7. We developed this together with their team. We are doing a lot of lights development in the automotive industry.
Starkey: Is the automotive industry the main growth area for IMS materials?
Benmayor: No, it's not the main growth area but it's the most demanding area. The automotive industry is probably peaking with technology and quality and there is a big request for fast dissipation on PCBs in the automotive industry and that's why we are really focused in this area.
Starkey: We're familiar with application of this automotive lighting, but what about developments in the electric vehicles and power management? Do you have applications in that area?
Benmayor: Yes, it's based always on the same principle. The electrical vehicles have a lot of power inside the models and require a lot of electrical strength. That's also a niche area of Aismalibar, where the fast thermal dissipation and the electrical strength are very important in these elements, and we are seeing a nice increase, especially in the power models used in the electrical automotive industry.
Page 1 of 3
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
08/27/2025 | Michael Carano -- Column: Trouble in Your TankTo quote the comedian Stephen Wright, “If at first you don’t succeed, then skydiving is not for you.” That can be the battle cry when you find that only small-diameter vias are exhibiting voids. Why are small holes more prone to voids than larger vias when processed through electroless copper? There are several reasons.
The Government Circuit: Navigating New Trade Headwinds and New Partnerships
08/25/2025 | Chris Mitchell -- Column: The Government CircuitAs global trade winds continue to howl, the electronics manufacturing industry finds itself at a critical juncture. After months of warnings, the U.S. Government has implemented a broad array of tariff increases, with fresh duties hitting copper-based products, semiconductors, and imports from many nations. On the positive side, tentative trade agreements with Europe, China, Japan, and other nations are providing at least some clarity and counterbalance.