-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
FKN Systek Enables Clean and Safe PCB Depaneling
December 5, 2016 | FKN SystekEstimated reading time: Less than a minute
FKN Systek has released a table top cut-off saw to use in singulating PCB panels up to 12” long. The S100 saw provides a low stress method to singulate panels and backplanes with sensitive surface mount components close to the edge of the parting section. The operator places the PCB to be singulated onto the positioning rails of a linear bearing guided table, and moves the table with the panel forward to make a smooth clean cut. The system features adjustable guide blades underneath the scoreline, making board alignment quick and easy.
Also, the PCB depaneling saw allows cutting depth to be set to just cut through the PCB itself. Any components which overhang the parting line will remain intact. A built-in dust extraction plenum around the saw blade pulls particles out of the environment into a HEPA filter. An additional clean up vacuum wand can be switched on as desired to remove any dust build up on the PCB edges.
The tool features a diamond saw blade measuring 2.95” (75mm) in diameter. It can cut boards up to 0.25” (6.35 mm) thick.
Suggested Items
All Flex Solutions Certified to ANSI/ESD S20.20-2021
09/19/2024 | All Flex SolutionsFactories that handle ESD-sensitive components at All Flex Solutions have earned certification to ANSI/ESD S20.20-2021 Electrostatic Discharge Control Program.
Transtec and YAMAHA Motor Robotics to Showcase Latest Technology at SMTAI 2024
09/18/2024 | Yamaha Motor Robotics Holdings Co., Ltd.Trans-Tec America, in Partnership with Yamaha Robotics USA, will exhibit dynamic SMT assembly technologies at the SMTAI 2024 trade show and conference, October 20 - 24, 2024 at the Donald E. Stephens Convention Center in Rosemont, IL, USA.
Cybord Raises $8.7 Million Series A to Expand First-of-its-Kind Visual AI Electronic Component Quality and Traceability Solution
09/17/2024 | CybordLeveraging AI and big data, Cybord analyzes 100% of electronic components on the assembly line, verifying their reliability, authenticity, and traceability to support all industries utilizing electronic circuit boards, from automotive to data centers
A Parametric Approach to the Environmental Impact of PCB Fabrication
09/09/2024 | Maarten Cauwe, imecSustainability for electronics is receiving more attention due to environmental concerns, regulatory obligations, and to ensure competitiveness in a growing market for sustainable products. To facilitate the discussion on the environmental impact of electronics, there is a strong need for data on energy use, carbon footprint, greenhouse gas (GHG) emissions, hazardous chemicals used during manufacturing, waste generation, etc.
Altium, Mouser Team Up to Advance Electronics Education and Careers Worldwide
09/05/2024 | AltiumAltium LLC, a global leader in software and solutions for the electronics industry, and Mouser Electronics, a global authorized distributor of semiconductors and electronic components, are excited to announce a strategic partnership aimed at advancing electronics education and careers worldwide.