Scientists to Develop Liquid Antennas
January 17, 2017 | University of LiverpoolEstimated reading time: 2 minutes
University of Liverpool researchers have been awarded £578k funding from the Engineering and Physical Sciences Research Council (EPSRC) to develop liquid antennas which have the potential to transform modern radio communications and radar.
Antennas convert radio waves into electrical signals and are an essential component in mobile and wireless products from smart phones to radar. Traditionally antenna are made out of materials such as copper which although have good conductive properties are hard to reconfigure with limited bandwidth, as well as being large, heavy and expensive.
As the `Internet of Things’ and 5G become more of a reality, there is a need to develop a new type of antenna which is small, transparent and has better reconfigurability than conventional metal antennas.
It is known that water can be used as an antenna and has potential to overcome many of the problems facing traditional metal antenna. However, water becomes ice once the temperature goes below 0 degree C.
This research project will bring together radio engineering experts from the Department of Electrical Engineering & Electronics (Professor Huang’s team) with Material Scientists in the Department of Chemistry (Professor Xiao’s team), to identify the most suitable liquid materials which can be used as antenna.
The liquids will be tested for low loss, thermal and mechanical stability, whether they can work in temperatures ranging from -30 to +60 degree C, if they transmit the correct frequency range (from kHz to GHz) and have Radio Frequency and microwave power range up to 100 kW.
The project will also investigate how to design and make compact and efficient liquid antennas which are flexible or reconfigurable in terms of the main antenna parameters (such as the operational frequency, radiation pattern, and size) and suitable for a wide range of real world applications.
Professor Yi Huang, an international expert in radio engineering who is leading the research, said: “This original and transformative approach is able to meet the demands of the next generation of mobile devices, and the opportunities afforded by the `Internet of Things’.
“This research project aims to go one step towards developing a novel type of antenna by bringing together new knowledge in material science with radio engineering expertise in order to provide an alternative compact reconfigurable and/or flexible device to the wireless world and meet the demands from the telecommunications industry.”
The research is funded by the EPSRC and also involves industrial partners BAE Systems and Huawei.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.