Laser Heating Hits the Spot
February 24, 2017 | A*STAREstimated reading time: 2 minutes
Laser-based measurements reveal just how small each magnetic ‘bit’ could be using the next generation hard disk technology known as heat-assisted magnetic recording
Heat-assisted magnetic recording could be the basis of the next generation of hard disk drive technologies. Stewart Waller/Getty
A method for accurately measuring the thermomagnetic properties of heat-assisted magnetic recording (HAMR) media reveals what the minimum bit size and ultimate data density might be for this next generation storage technology.
Existing hard disk technology is approaching fundamental physical limits on the amount of data that can be stored on magnetic disks. One of the most promising technologies capable of breaching these limits is HAMR, which heats small areas to allow for smaller magnetic bits and higher data densities. The minimum possible bit size has been the subject of considerable debate. Yang Hongzhi and Yunjie Chen from the A*STAR Data Storage Institute (DSI) have now developed a method using two lasers to put this debate to rest.
“The basic idea of HAMR is to use a tiny laser spot to heat the magnetic material on the disk to its critical ‘Curie’ temperature, which makes it more easily writable,” explains Chen.
Writability sets the upper limit on data density as it determines how small an area can be magnetically ‘switched’ using the weak magnetic field of conventional data writing heads. By heating the magnetic disk to a certain temperature, a material with an intrinsically finer-grained magnetic fabric can be used, resulting in smaller bits. One of the unknowns surrounding the technology is how far each bit would need to be separated in order to maintain reliable switching without affecting neighboring bits.
“The switching field distribution at the heating temperature is directly related to how narrow a magnetic transition can be recorded, which will decide the data density that could be achieved,” says Chen. “Using a lab-built multifunctional HAMR writing and measurement system here at the DSI, we developed a method that allows us to accurately measure the thermomagnetic properties of HAMR media at the Curie temperature.”
The team’s approach uses two laser beams, one to spot-heat the media to exactly the right temperature, and the other to measure the magnetic signal based on an unusual interaction between magnetism and light known as the magneto-optic Kerr effect.
Using this approach, the researchers were able to run a range of tests on experimental HAMR media, providing unprecedented insight into its thermomagnetic response. “We expect this test method to be helpful for characterization and development of HAMR media as the major candidate for the next generation of hard disk drive technologies.”
Suggested Items
Gartner Survey Finds 61% of Organizations Are Evolving Their D&A Operating Model Because of AI Technologies
05/01/2024 | Gartner, Inc.Sixty-one percent of organizations are forced to evolve or rethink their data and analytics (D&A) operating model because of the impact of disruptive artificial intelligence (AI) technologies, according to a new Gartner, Inc. survey.
Real Time with… IPC APEX EXPO 2024: Operational Excellence and Smart Factory Initiatives
04/30/2024 | Real Time with...IPC APEX EXPOOperational excellence and operational efficiency are defined in this interview with Koh Young General Manager Joel Scutchfield. He touches on automation, AI, and collaboration as solutions to resource limitations. Koh Young's data-driven approach uses AI for process adjustments, data analytics, and supply chain enhancements. The discussion underscores the shift toward smart factory initiatives and the future of manufacturing, with a focus on reshoring, nearshoring, and technology utilization.
IDTechEx Report on Quantum Technology: Nano-scale Physics for Massive Market Impact
04/30/2024 | PRNewswireThe quantum technology market leverages nano-scale physics to create revolutionary new devices for computing, sensing, and communications. Across the industry, quantum technology offers a paradigm shift in performance compared with incumbent solutions.
NASA’s Optical Comms Demo Transmits Data Over 140 Million Miles
04/30/2024 | NASA JPLNASA’s Deep Space Optical Communications experiment also interfaced with the Psyche spacecraft’s communication system for the first time, transmitting engineering data to Earth.
Real Time with… IPC APEX EXPO 2024: Insight into Summit Interconnect's Success
04/30/2024 | Real Time with...IPC APEX EXPOShane Whiteside, CEO of Summit Interconnect, discusses the company's recent recognition as one of the best PCB fabricators in the industry by receiving IPC's Peter Sarmanian award. Whiteside touches on the impact of changes in the marketplace, such as the Defense Production Act and presidential determination, on their growth. Whiteside also shares the company's focus on mechanical and data automation to enhance manufacturing processes and anticipates more automation and evolution in the industry.