Researchers Harness Heat to Power Computers
April 19, 2017 | University of Nebraska–LincolnEstimated reading time: 2 minutes
One of the biggest problems with computers, dating to the invention of the first one, has been finding ways to keep them cool so that they don’t overheat or shut down. Instead of combating the heat, two University of Nebraska–Lincoln engineers have embraced it as an alternative energy source that would allow computing at ultra-high temperatures.
Sidy Ndao, assistant professor of mechanical and materials engineering, said his research group’s development of a nano-thermal-mechanical device, or thermal diode, came after flipping around the question of how to better cool computers.
“If you think about it, whatever you do with electricity you should (also) be able to do with heat, because they are similar in many ways,” Ndao said. “In principle, they are both energy carriers. If you could control heat, you could use it to do computing and avoid the problem of overheating.”
A paper Ndao co-authored with Mahmoud Elzouka, a graduate student in mechanical and materials engineering, was published in the March edition of Scientific Reports. In it, they documented their device working in temperatures that approached 630 degrees Fahrenheit.
Ndao said he expects the device could eventually work in heat as extreme as 1,300 degrees Fahrenheit, which could have major implications in many industries.
“We are basically creating a thermal computer,” Ndao said. “It could be used in space exploration, for exploring the core of the earth, for oil drilling, (for) many applications. It could allow us to do calculations and process data in real time in places where we haven’t been able to do so before.”
By taking advantage of an energy source that has long been overlooked, Ndao said, the thermal diode could also help limit the amount of energy that gets wasted.
“It is said now that nearly 60 percent of the energy produced for consumption in the United States is wasted in heat,” Ndao said. “If you could harness this heat and use it for energy in these devices, you could obviously cut down on waste and the cost of energy.”
The next step is making the device more efficient and making a physical computer that could work in the highest of temperatures, Ndao said.
Though the researchers have filed for a patent, Elzouka said there is still work to be done to improve the diode and its performance.
“If we can achieve high efficiency, show that we can do computations and run a logic system experimentally, then we can have a proof-of-concept,” Elzouka said. “(That) is when we can think about the future.”
Yet Ndao has even bigger ambitions for his group’s research.
“We want to to create the world’s first thermal computer,” he said. “Hopefully one day, it will be used to unlock the mysteries of outer space, explore and harvest our own planet’s deep-beneath-the-surface geology, and harness waste heat for more efficient-energy utilization.”
Suggested Items
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
The Pulse: Drilling Down on Documentation
04/18/2024 | Martyn Gaudion -- Column: The PulseHow did a product aimed at signal integrity end up being more about documentation? For a little backstory, the Polar team has an unspoken “no business speak” rule at certain times. So, why is this column titled “Drilling Down?” I find it fascinating when a company sets off in one direction, but customers steer it in another. That’s what has happened here as customers took a product down a fork in the road we couldn’t predict. Your destination isn’t always where you initially set off to go, and that’s how we got to our subject of drills and drill documentation.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
MKS Instruments Receives 2023 Outstanding Service Award from MFLEX
02/29/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, recently received the 2023 Outstanding Service Award from MFLEX, a global leader in flexible printed circuit board manufacturing and assembly. The award recognizes MKS for outstanding customer support and system service in high-production manufacturing environments.
Schmoll: Pushing Drilling Forward
10/03/2023 | Nolan Johnson, PCB007 MagazineAutomation is everywhere, and nowhere is that more evident than the machines from Schmoll used in the new captive facility for Schweitzer Engineering Laboratories. Schmoll Maschinen GmbH Executive Director Stephan Kunz, and Evan Howard, service manager for Schmoll products, Burkle North America, discuss how their machines are perfectly suited for SEL’s production lines.